Vivo V20 PD2067F Flash File Firmware | Fix Fastboot & Touch Not Working After Flash
Is your Vivo V20 PD2067F stuck on fastboot screen, showing a dm-verity verification failed message, or not booting up properly after flash? If yes, then flashing the correct stock ROM can help resolve these critical issues — including black screen, dead boot, and touch not responding problems.
🧰 Vivo V20 PD2067F Firmware Solves These Issues:
- dm-verity verification failed
- Stuck on fastboot logo or boot loop
- Touch not working after flash
- OS update failed / black screen
- No power / Qualcomm QDLoader 9008 Mode
- Recovery mode crash or corrupted system
📁 Download Vivo V20 PD2067F Official Flash File & Tools:
PD2067F_EX_A_1.70.53 Firmware File |
QPST (QFIL) Flash Tool |
Qualcomm USB Drivers |
⚠️ Precautions Before Flashing Vivo V20:
Important: Always verify your device's build number before flashing. Charge the device to at least 60% and backup your data, as flashing will erase everything.
🛠️ How to Flash Vivo V20 PD2067F Using QFIL:
- Extract the firmware ZIP using 7zip or WinRAR.
- Install Qualcomm USB drivers on your Windows PC.
- Launch QFIL tool from the QPST package.
- Select Flat Build in QFIL.
- Click Browse and load
prog_emmc_firehose_*.mbn
file. - Click on Load XML → Select
rawprogram.xml
and thenpatch.xml
. - Put Vivo V20 in EDL Mode (use test point if required).
- Once detected as Qualcomm HS-USB QDLoader 9008, hit Download.
- Wait for the process to complete and reboot your phone.
💡 Flashing Tips:
- Phone stuck again after flash? Try wiping data/factory reset in recovery.
- Touch not working? Flash the exact same firmware version as installed before.
- If device doesn’t boot, reflash after full driver reinstall.
For more firmware downloads or flashing help, visit Firmware4Mobile.com for trusted files and guides.
Tags: Vivo V20 PD2067F Flash File, QFIL Flash Guide, dm-verity Error Fix, Vivo Fastboot Mode, Dead Boot Repair, Vivo Touch Problem After Flash