Vivo PD1969F Flash File Firmware | Fix dm-verity Error & Fastboot Mode
Is your Vivo PD1969F stuck on fastboot mode or showing a dm-verity verification failed error? This issue usually appears after flashing a wrong firmware or corrupt boot image. Don’t worry — flashing the correct stock ROM will solve these problems including black screen, touch not working, dead boot, or no power.
🔧 Common Issues Solved with This Firmware:
- Stuck on fastboot mode
- dm-verity verification failed
- Touch not working after flashing
- Blank screen or display not turning on
- Vivo PD1969F dead after flash
- OS corruption or boot loop
📂 Firmware & Required Files Download:
| PD1969F_EX_A_6.72.3 Firmware File |
| QPST (QFIL) Flash Tool |
| Qualcomm USB Drivers |
⚠️ Important Precautions:
Before flashing: Make sure your Vivo PD1969F is at least 60% charged. Only use the exact firmware version matching your device’s build number. Using the wrong version may cause display, Wi-Fi, or signal issues after flash.
🛠️ How to Flash Vivo PD1969F Using QFIL Tool:
- Extract the downloaded firmware using 7zip or WinRAR.
- Install Qualcomm USB drivers on your PC.
- Open QFIL Tool from QPST software package.
- Set the build type to Flat Build.
- Browse and select
prog_emmc_firehose_*.mbnfile. - Click on Load XML and choose
rawprogram.xmlfollowed bypatch.xml. - Put the phone into EDL mode using Test Point (Google it if needed).
- Connect the phone to PC. It should show as
Qualcomm HS-USB QDLoader 9008in Device Manager. - Click on Download to start flashing.
💡 Troubleshooting Tips:
- If flashing stops midway, try another USB cable or port.
- After flash, boot into recovery and do a factory reset if the phone boot loops.
- If touch still doesn’t work, ensure you used the exact build version firmware.
Need more help or a different model? Visit Firmware4Mobile.com for tested ROMs, QFIL tool setup, and recovery guides.
Tags: Vivo PD1969F Flash File, Stock ROM, QFIL Flashing Guide, Fastboot Fix, dm-verity Error Solution, Vivo Dead Boot Repair