Huawei P10 VTR-AL00 / VTR-TL00 Flash File (Firmware) Board Firmware Free – Dead Boot Repair & SD Card Method

Mr Mobile
0

Common Issue: Huawei P10 Dead Boot or No Power

If your Huawei P10 VTR-AL00 is stuck on the logo, completely dead, or not responding even after charging, you’re likely facing a dead boot issue. This post provides two working methods to recover your phone using:

  • Kirin Dead Boot Repair Flash Tool (for motherboards like M00A047 or M00A063)
  • SD Card Firmware Upgrade method using dload folder

📥 Download Huawei P10 Flash Files (No Password)

Device: Huawei P10
Model Variants: VTR-AL00 / VTR-TL00
CPU: HiSilicon Kirin
Status: Official Firmware – Free & No Password

Firmware Motherboard Android Version Download Link
VTR-AL00 9.1.0.219 (EMUI 9.1.0) Officel ROM Android 9 Download (No Password)
Board Software – M00A047 M00A047 Android 7 Download (No Password)
Board Software – M00A063 M00A063  Only For DC Phoenix Tool  Download (No Password)

🔧 How to Flash Huawei P10 with Kirin Dead Boot Repair Tool

  1. Download and extract the correct board software based on your motherboard version (M00A047 or M00A063).
  2. Install Kirin Flash Tool on your PC.
  3. Boot the phone into USB Download mode (test point may be required for dead boot devices).
  4. Connect the device via USB cable.
  5. Load the board software into the tool and start flashing.

Note: If you are unsure about your motherboard version, check it on the main PCB sticker or try both firmware files carefully one at a time.

 Flash Huawei P10 with SD Card (EMUI 9.1)

This method is useful if your phone boots into recovery or upgrade mode.

  1. Format a micro SD card (minimum 8GB, FAT32).
  2. Download and extract the file:
    VTR-AL00 9.1.0.219 (EMUI 9.1)

✅ Key Benefits

  • All files are 100% tested and working.
  • No password or subscription required.
  • Fully compatible with Huawei P10 variants.
  • Fix dead boot, stuck on logo, software crash, and blank screen issues.

📝 Final Notes

Always backup your data before flashing if possible. If your device doesn’t respond after flashing, retry with a different firmware based on your board version.

For more firmware files, tutorials, and solutions to Android problems, visit our official website: www.firmware4mobile.com.

إرسال تعليق

0 تعليقات

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!