(Infinix Smart 8 Plus MT6765 Chipset | Android 13 Go Edition)
š± Device Identification:
- Model: X6526 (Check under battery or Settings > About)
- Key Spec: 6.6" HD+ | 5000mAh | 13MP Dual Cam
- Chipset: MediaTek MT6765 Helio G36
⚠️ Pre-Installation Notes:
- For X6526 only (not X6525/X6527)
- Backup all data (flashing erases everything)
- Charge device to minimum 60%
š„ Firmware Details:
| Component | Specification |
| Android Version | 13 (Go Edition) |
| XOS Version | 12.6 |
| Security Patch | March 2024 |
| File Type | Signed Factory ROM |
| File Size | ~2.8GB (compressed) |
š§ Required Tools:
- SP Flash Tool v5.2208+
- MTK USB Drivers v1.0.8
- 7-Zip/WinRAR (for extraction)
- Original USB cable
⚡ Flashing Procedure:
- Prepare Files: - Extract downloaded firmware - Locate scatter file (MT6765_Android_scatter.txt)
- Setup Software: - Install MTK VCOM drivers - Run SP Flash Tool as Administrator
- Configure Flash Tool: - Load scatter file - Select "Download Only" mode - Uncheck "PRELOADER" unless necessary
- Start Flashing: - Power off device completely - Click "Download" button - Connect device via USB - Wait for red then yellow progress bars
- Completion: - Green checkmark indicates success - Disconnect device - First boot takes 8-12 minutes
š Post-Flash Verification:
- Check IMEI (*#06#)
- Test all sensors (*#*#4636#*#*)
- Verify camera functionality
- Check for OTA updates
šØ Troubleshooting Guide:
| Error | Solution |
| BROM ERROR 4032 | Use USB 2.0 port + original cable |
| IMEI Null | Restore from NVRAM backup |
| Bootloop | Format All + Download |
⚖️ Disclaimer: This guide is for educational purposes. We don't distribute firmware files. Obtain from official Infinix sources only.
š” Expert Recommendations:
- Calibrate battery after flashing (full charge cycle)
- Enable OEM Unlock in Developer Options first
- Wait 72 hours before rooting
- Avoid custom recoveries initially
Download the necessary Files Tools and Drivers:
MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File