Infinix Hot 40i X6528B DUMP Firmware Flash Guide (Pandora Tool)

⚠️ Infinix Hot 40i X6528B SPD/Unisoc Dead Boot Repair Solution

📌 Before You Begin:

• Confirm Model: X6528B (SPD/Unisoc T606 CPU)
• Tool Requirement: Pandora Box with SPD license
• Special Note: This is DUMP firmware for dead/bricked devices only

🔧 Required Setup:

Component	Specification
Software	Pandora Tool v1.7+ with SPD support
Driver	SPD ResearchDownload Tool Driver
Firmware Type	DUMP (Full flash including preloader)
Connection	Test Point Method (for dead devices)

⚙️ Firmware Details:

• CPU: Spreadtrum/Unisoc T606
• Format: .PAC file
• Content: Full flash including:
  • Bootloader
  • NVRAM
  • System
  • Userdata

🔌 Hardware Preparation:

1. Open device back cover
2. Locate SPD test points (refer to service manual)
3. Connect USB to PC while shorting test points
4. Use original USB cable

🚀 Pandora Tool Flashing Steps:

1. Load Firmware: - Open Pandora Tool - Select SPD/Unisoc platform - Load .PAC DUMP file
2. Connection Setup: - Set to "Dead Boot Repair" mode - Select "Format + Download" - Check "Force Erase NVRAM" for dead devices
3. Start Process: - Click "Start" button - Connect test-point-shorted device - Wait for detection (COM port will appear)
4. Complete Flash: - Progress bar will show writing status - Don't interrupt until green "Success" appears - First boot may take 15-20 minutes

⚠️ Critical Warnings:

• DUMP firmware will erase all existing data
• Incorrect test point connection may damage device
• Never disconnect during NVRAM writing
• Backup original NVRAM if possible

🔧 Post-Flash Repairs:

Issue	Solution
No IMEI	Write IMEI using SPD Auth Tool
No Signal	Repair NV Data via ResearchDownload
Touch Not Working	Flash original TP firmware

⚖️ Legal Disclaimer: This DUMP firmware is for repair purposes only. Commercial use may violate copyright laws. Use only on devices you own.

💡 Professional Tips:

• Use quality USB hub for stable connection
• Keep device in cool environment during flashing
• Document original IMEI before flashing
• For persistent issues, check CPU reballing

Download the necessary tools and drivers:

SPD USB Drivers SPD Upgrade Tool Transsion Tool

ROM X6528B DUMP Firmware Via Pandora Tool