📶 Tecno Spark 10 5G KI8 Stock ROM | Official Firmware Flash Guide
⚠️ IMPORTANT: This guide is for educational purposes only. We don't provide direct firmware downloads. Always obtain official KI8 firmware from authorized sources.
🔍 KI8 Firmware Details
Device Model
Tecno Spark 10 5G (KI8)
Tecno Spark 10 5G (KI8)
Chipset
MediaTek Dimensity 6020
MediaTek Dimensity 6020
Android Version
Android 13
Android 13
📋 Pre-Flash Requirements
- 🔋 60%+ battery (critical for 5G devices)
- 💾 Backup all data (contacts, messages, media)
- 🖥️ Windows 10/11 PC (admin rights required)
- 📌 Original USB cable (USB 3.0 recommended)
- ⚙️ SP Flash Tool v5.2316+
- 💿 MediaTek VCOM drivers
⚡ Flashing Procedure
1. Software Setup:
Extract firmware package → Install SP Flash Tool as Administrator
Extract firmware package → Install SP Flash Tool as Administrator
2. Load Scatter File:
Click "Choose" → Select
Click "Choose" → Select
MT6833_Android_scatter.txt
3. Connect Device:
Power off → Hold Volume Down + Power → Connect USB
Power off → Hold Volume Down + Power → Connect USB
4. Start Flashing:
Click "Download" → Wait 20-30 minutes
Click "Download" → Wait 20-30 minutes
5. First Boot:
Disconnect → Power on (first boot takes 8-12 minutes)
Disconnect → Power on (first boot takes 8-12 minutes)
🔧 Common Issues Fixed
| Problem | Solution |
|---|---|
| 5G not working | Flash modem.img |
| Boot loop | Format + Download |
| IMEI loss | Restore NV data |
| Touch issues | Replace touch driver |
💡 Pro Tip: After flashing, perform factory reset for optimal 5G performance.
✅ Post-Flash Checklist
- Verify 5G connectivity
- Check IMEI (*#06#)
- Test all network bands
- Update system apps
📢 LEGAL: Tecno Spark 10 5G firmware is proprietary. Follow local laws regarding device modification.
Download the necessary tools and drivers:
MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824