📱 Tecno Spark 10 KI5N Stock ROM | Official Firmware Fix Guide
ℹ️ NOTE: This guide provides the official flashing method for Tecno Spark 10 KI5N. We do not provide direct firmware downloads.
🔧 KI5N Firmware Details
Model Variant
KI5N (Spark 10)
KI5N (Spark 10)
Chipset
MediaTek Helio G37
MediaTek Helio G37
Android Version
Android 13
Android 13
📋 Before You Begin
- 🔋 Charge to 50%+ (prevents power failure during flash)
- 💾 Backup all data (contacts, messages, media files)
- 🖥️ Windows 10/11 PC (admin privileges required)
- 📌 Original USB cable (data transfer capable)
- ⚙️ SP Flash Tool v5.2208+
- 💿 MediaTek VCOM drivers
⚡ Flashing Procedure
Step 1: Extract firmware package → Install SP Flash Tool as Administrator
Step 2: Load scatter file (
MT6765_Android_scatter.txt)
Step 3: Power off phone → Hold Volume Down → Connect USB
Step 4: Click "Download" → Wait 15-20 minutes
Step 5: Disconnect → Power on (first boot takes 5-8 minutes)
🔍 Common Issues Fixed
| Problem | Solution |
|---|---|
| Boot loop | Full firmware flash |
| Hang on logo | Format + Download |
| No signal | Flash modem.img |
| Touch issues | Replace touch driver |
💡 Tip: After flashing, perform factory reset for optimal performance.
✅ Post-Flash Checklist
- Verify IMEI (*#06#)
- Test WiFi/Bluetooth
- Check camera functions
- Update system apps
📢 Disclaimer: Firmware is copyrighted material. Follow local laws regarding device modification.
Download the necessary tools and drivers:
MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824