📸 Tecno Camon 20 CK6NS Stock ROM | Firmware Fix Guide
⚠️ IMPORTANT: This guide is for educational purposes only. We don't provide direct firmware downloads. Obtain official CK6NS files from authorized Tecno sources.
🔍 CK6NS Firmware Details
Device Model
Tecno Camon 20 (CK6NS)
Tecno Camon 20 (CK6NS)
Chipset
MediaTek Helio G85
MediaTek Helio G85
Android Version
Android 13
Android 13
📋 Preparation Checklist
- ✔️ Confirm CK6NS model (Settings → About Phone)
- ✔️ 60%+ battery (minimum requirement)
- ✔️ SP Flash Tool v5.2208+
- ✔️ MediaTek USB Drivers
- ✔️ Original USB cable
- ✔️ Backup camera settings (Camon-specific)
⚡ Flashing Procedure
1. Extract Files:
Unzip firmware package → Locate scatter file (
Unzip firmware package → Locate scatter file (
MT6768_Android_scatter.txt)
2. Configure SP Flash Tool:
Load scatter file → Select "Download Only" mode
Load scatter file → Select "Download Only" mode
3. Connect Device:
Power off → Hold Volume Down → Connect USB
Power off → Hold Volume Down → Connect USB
4. Start Flashing:
Click "Download" → Wait 20-30 minutes
Click "Download" → Wait 20-30 minutes
5. First Boot:
Disconnect → Power on → Setup takes 5-10 minutes
Disconnect → Power on → Setup takes 5-10 minutes
🔧 Common Software Fixes
| Issue | Solution |
|---|---|
| Camera errors | Flash camera calibration |
| Boot loop | Format + Download |
| Network issues | Flash modem.img |
| Touch problems | Replace touch driver |
✅ Post-Flash Checks
- 📸 Test all camera features
- 📶 Verify network connectivity
- 🔋 Check battery performance
- 🔄 Run OTA update
📢 LEGAL: Tecno Camon 20 CK6NS firmware is proprietary. Follow local laws regarding device modification.
Download the necessary tools and drivers:
MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824