Download Infinix Smart 4+ X680D Stock ROM | Flash Firmware for Infinix Smart 4+ X680D | Infinix Smart 4+ X680D Fix Software Issues
Discover how to download the Infinix Smart 4+ X680D Stock ROM, flash firmware, and resolve common software problems like Infinix Smart 4+ X680D dead boot, Infinix Smart 4+ X680D black screen, unresponsive touch, and more. This comprehensive guide provides step-by-step instructions to flash the Infinix Smart 4+ X680D using the SP Flash Tool and fix errors such as "dm verity verification failed" or being stuck in Fastboot mode.
Essential Instructions Before Flashing Infinix Smart 4+ X680D Firmware:
Before starting, ensure the firmware files match your Infinix Smart 4+ X680D build version. It’s critical to charge your Infinix Smart 4+ X680D battery to at least 50% to prevent interruptions during the flashing process. Using incorrect firmware can lead to permanent damage, so double-check the files before proceeding.
 |
| On this page, you can download the official Infinix Smart 4+ X680D firmware stock ROM flash file. This firmware is designed to repair the Infinix Smart 4+ X680D operating system, recover from Infinix Smart 4+ X680D dead boot issues, and fix other Infinix Smart 4+ X680D software-related problems. The Infinix Smart 4+ X680D is powered by a MediaTek (MTK) processor, so you’ll need to use the Mediatek Flash Tool to flash the Infinix Smart 4+ X680D firmware. The Infinix Smart 4+ X680D firmware files are provided in a zip package, so after downloading, extract them using tools like 7zip or WinRAR. |
Warning!
Infinix Smart 4+ X680D Flashing the firmware will erase all data on your Infinix Smart 4+ X680D. Make sure to back up important files before proceeding. Additionally, ensure you’re using the correct build version of the firmware to avoid bricking your Infinix Smart 4+ X680D.
Before starting, install the necessary Infinix Smart 4+ X680D drivers on your computer. Extract the Infinix Smart 4+ X680D firmware files using WinRAR or 7zip to prepare for the flashing process.
Always verify the firmware version and Infinix Smart 4+ X680D model before flashing to avoid compatibility issues. Using the wrong firmware can result in a non-functional device.
Step-by-Step Guide to Flash Infinix Smart 4+ X680D Firmware
- Download the SP Flash Tool and Infinix Smart 4+ X680D Firmware, then extract the files using 7zip or WinRAR.
- Open the SP Flash Tool folder and locate the
Flash_tool.exefile. Double-click to launch the tool.- Click on the "Scatter Loading" button and load the
MT6XXX_Android_scatter.txtfile from the extracted firmware folder.- Load the Infinix Smart 4+ X680D DA Auth Files in the Flash Tool to authenticate the process.
- Click on "Bypass Auth" in the Flash Tool to proceed without authorization issues.
- Click the "Download" button to start the flashing process.
- Power off your Infinix Smart 4+ X680D completely or remove and reinsert the battery to ensure it’s in the correct mode for flashing.
- Connect your Infinix Smart 4+ X680D to the computer using a USB cable.
- Wait for the MTK Port to appear in the device manager, indicating a successful connection.
- The flashing process will begin and take approximately 7-8 minutes. Do not disconnect the Infinix Smart 4+ X680D during this time to avoid errors.
If you encounter any issues during the process, feel free to ask for help in the comment section below. If you’ve made a mistake while flashing, search for your Infinix Smart 4+ X680D model on our website and follow the recovery instructions to restore your device.
| Download | Description |
|---|---|
| Stock ROM Firmware | X680D_H6116J_Q_AS_211130V404 |
| SP Flash Tool v51824 | Tool for flashing MediaTek firmware |
| MTK USB Drivers | Drivers for MediaTek devices |
| Universal DA File | Authentication file for flashing |