Download Infinix Hot 9 X655C Stock ROM | Flash Firmware for Infinix Hot 9 X655C | Infinix Hot 9 X655C Fix Software Issues
Discover how to download the Infinix Hot 9 X655C Stock ROM, flash firmware, and resolve common software problems like Infinix Hot 9 X655C dead boot, Infinix Hot 9 X655C black screen, unresponsive touch, and more. This comprehensive guide provides step-by-step instructions to flash the Infinix Hot 9 X655C using the SP Flash Tool and fix errors such as "dm verity verification failed" or being stuck in Fastboot mode.
Essential Instructions Before Flashing Infinix Hot 9 X655C Firmware:
Before starting, ensure the firmware files match your Infinix Hot 9 X655C build version. It’s critical to charge your Infinix Hot 9 X655C battery to at least 50% to prevent interruptions during the flashing process. Using incorrect firmware can lead to permanent damage, so double-check the files before proceeding.
 |
| On this page, you can download the official Infinix Hot 9 X655C firmware stock ROM flash file. This firmware is designed to repair the Infinix Hot 9 X655C operating system, recover from Infinix Hot 9 X655C dead boot issues, and fix other Infinix Hot 9 X655C software-related problems. The Infinix Hot 9 X655C is powered by a MediaTek (MTK) processor, so you’ll need to use the Mediatek Flash Tool to flash the Infinix Hot 9 X655C firmware. The Infinix Hot 9 X655C firmware files are provided in a zip package, so after downloading, extract them using tools like 7zip or WinRAR. |
Warning!
Infinix Hot 9 X655C Flashing the firmware will erase all data on your Infinix Hot 9 X655C. Make sure to back up important files before proceeding. Additionally, ensure you’re using the correct build version of the firmware to avoid bricking your Infinix Hot 9 X655C.
How to Flash Infinix Hot 9 X655C Using SP Flash Tool
- Download Required Files:
- Download the SP Flash Tool and the appropriate firmware for your Infinix Hot 9 X655C.
- Ensure you have the correct firmware version for your Infinix Hot 9 X655C.
- Install Infinix Hot 9 X655C USB Drivers:
- Install the Infinix Hot 9 X655C USB drivers on your computer to ensure proper communication between the Infinix Hot 9 X655C and the PC.
- Extract Infinix Hot 9 X655C Firmware:
- Extract the Infinix Hot 9 X655C firmware files using a tool like WinRAR or 7zip. Ensure you have the
MTK_Android_scatter.txtfile and other necessary files ready.- Open SP Flash Tool:
- Launch the SP Flash Tool by running the executable file.
- Load Infinix Hot 9 X655C Scatter File:
- Click on the Scatter Loading button in the tool.
- Browse and load the
MTK_Android_scatter.txtfile from the extracted Infinix Hot 9 X655C firmware folder.- Select Download Mode:
- In the tool, select Download Only or Firmware Upgrade mode, depending on your requirement.
- Prepare Your Infinix Hot 9 X655C:
- Power off your Infinix Hot 9 X655C completely.
- If your Infinix Hot 9 X655C has a removable battery, remove it and reinsert it after a few seconds.
- Connect Infinix Hot 9 X655C to PC:
- Connect your Infinix Hot 9 X655C to the computer using a USB cable.
- Wait for the Infinix Hot 9 X655C to be detected by the tool. A red bar will appear at the bottom of the tool indicating the connection.
- Start Infinix Hot 9 X655C Flashing:
- Click on the Download button in the SP Flash Tool to begin the Infinix Hot 9 X655C flashing process.
- Wait for Completion:
- The Infinix Hot 9 X655C flashing process will take a few minutes. A green circle will appear once the process is successfully completed.
- Do not disconnect the Infinix Hot 9 X655C during this process.
- Reboot Device:
- Once the process is complete, disconnect the Infinix Hot 9 X655C and power it on. Your Infinix Hot 9 X655C should now be running the new firmware.
Note: Ensure your Infinix Hot 9 X655C has sufficient battery (at least 50%) before starting the process to avoid interruptions.