Download Infinix Hot 10i PR652C Stock ROM | Flash Firmware for Infinix Hot 10i PR652C | Infinix Hot 10i PR652C Fix Software Issues
Discover how to download the Infinix Hot 10i PR652C Stock ROM, flash firmware, and resolve common software problems like Infinix Hot 10i PR652C dead boot, Infinix Hot 10i PR652C black screen, unresponsive touch, and more. This comprehensive guide provides step-by-step instructions to flash the Infinix Hot 10i PR652C using the SP Flash Tool and fix errors such as "dm verity verification failed" or being stuck in Fastboot mode.
Essential Instructions Before Flashing Infinix Hot 10i PR652C Firmware:
Before starting, ensure the firmware files match your Infinix Hot 10i PR652C build version. It’s critical to charge your Infinix Hot 10i PR652C battery to at least 50% to prevent interruptions during the flashing process. Using incorrect firmware can lead to permanent damage, so double-check the files before proceeding.
On this page, you can download the official Infinix Hot 10i PR652C firmware stock ROM flash file. This firmware is designed to repair the Infinix Hot 10i PR652C operating system, recover from Infinix Hot 10i PR652C dead boot issues, and fix other Infinix Hot 10i PR652C software-related problems. The Infinix Hot 10i PR652C is powered by a SPD processor, so you’ll need to use the SPD Flash Tool to flash the Infinix Hot 10i PR652C firmware. The Infinix Hot 10i PR652C firmware files are provided in a zip package, so after downloading, extract them using tools like 7zip or WinRAR. |
Warning!
Infinix Hot 10i PR652C Flashing the firmware will erase all data on your Infinix Hot 10i PR652C. Make sure to back up important files before proceeding. Additionally, ensure you’re using the correct build version of the firmware to avoid bricking your Infinix Hot 10i PR652C.
Step-by-Step Guide to Flash SPD Phone Using SPD Flash Tool
- Download Required Infinix Hot 10i PR652C Files:
- Download the SPD Flash Tool and the appropriate firmware for your Infinix Hot 10i PR652C.
- Ensure you have the correct firmware version for your Infinix Hot 10i PR652C.
- Install Infinix Hot 10i PR652C USB Drivers:
- Install the SPD USB drivers on your computer to ensure proper communication between the Infinix Hot 10i PR652C and the PC.
- Extract Infinix Hot 10i PR652C Firmware:
- Extract the Infinix Hot 10i PR652C firmware files using a tool like WinRAR or 7zip. Ensure you have the
pac
orbin
file and other necessary files ready.- Open SPD Flash Tool:
- Launch the SPD Flash Tool by running the executable file.
- Load Infinix Hot 10i PR652C Firmware Pac File:
- Click on the Load Package or Load Firmware button in the tool.
- Browse and load the
.pac
or.bin
file from the extracted Infinix Hot 10i PR652C firmware folder.- Prepare Your Infinix Hot 10i PR652C:
- Power off your Infinix Hot 10i PR652C completely.
- If your Infinix Hot 10i PR652C has a removable battery, remove it and reinsert it after a few seconds.
- Connect Infinix Hot 10i PR652C to PC:
- Connect your Infinix Hot 10i PR652C to the computer using a USB cable.
- Wait for the Infinix Hot 10i PR652C to be detected by the tool. A notification or status bar will indicate the connection.
- Start Flashing:
- Click on the Start or Download button in the SPD Flash Tool to begin the flashing process.
- Wait for Completion:
- The flashing process will take a few minutes. A success message or green indicator will appear once the process is completed.
- Do not disconnect the Infinix Hot 10i PR652C during this process.
- Reboot Device:
- Once the process is complete, disconnect the Infinix Hot 10i PR652C and power it on. Your SPD phone should now be running the new firmware.
Note: Ensure your Infinix Hot 10i PR652C has sufficient battery (at least 50%) before starting the process to avoid interruptions.