Download Infinix Diamond X402 Stock ROM | Flash Firmware for Infinix Diamond X402 | Infinix Diamond X402 Fix Software Issues
Discover how to download the Infinix Diamond X402 Stock ROM, flash firmware, and resolve common software problems like Infinix Diamond X402 dead boot, Infinix Diamond X402 black screen, unresponsive touch, and more. This comprehensive guide provides step-by-step instructions to flash the Infinix Diamond X402 using the SP Flash Tool and fix errors such as "dm verity verification failed" or being stuck in Fastboot mode.
Essential Instructions Before Flashing Infinix Diamond X402 Firmware:
Before starting, ensure the firmware files match your Infinix Diamond X402 build version. It’s critical to charge your Infinix Diamond X402 battery to at least 50% to prevent interruptions during the flashing process. Using incorrect firmware can lead to permanent damage, so double-check the files before proceeding.
 |
| On this page, you can download the official Infinix Diamond X402 firmware stock ROM flash file. This firmware is designed to repair the Infinix Diamond X402 operating system, recover from Infinix Diamond X402 dead boot issues, and fix other Infinix Diamond X402 software-related problems. The Infinix Diamond X402 is powered by a MediaTek (MTK) processor, so you’ll need to use the Mediatek Flash Tool to flash the Infinix Diamond X402 firmware. The Infinix Diamond X402 firmware files are provided in a zip package, so after downloading, extract them using tools like 7zip or WinRAR. |
Warning!
Infinix Diamond X402 Flashing the firmware will erase all data on your Infinix Diamond X402. Make sure to back up important files before proceeding. Additionally, ensure you’re using the correct build version of the firmware to avoid bricking your Infinix Diamond X402.
Before starting, install the necessary Infinix Diamond X402 drivers on your computer. Extract the Infinix Diamond X402 firmware files using WinRAR or 7zip to prepare for the flashing process.
Always verify the firmware version and Infinix Diamond X402 model before flashing to avoid compatibility issues. Using the wrong firmware can result in a non-functional device.
Step-by-Step Guide to Flash Infinix Diamond X402 Firmware
- Download the SP Flash Tool and Infinix Diamond X402 Firmware, then extract the files using 7zip or WinRAR.
- Open the SP Flash Tool folder and locate the
Flash_tool.exefile. Double-click to launch the tool.- Click on the "Scatter Loading" button and load the
MT6XXX_Android_scatter.txtfile from the extracted firmware folder.- Load the Infinix Diamond X402 DA Auth Files in the Flash Tool to authenticate the process.
- Click on "Bypass Auth" in the Flash Tool to proceed without authorization issues.
- Click the "Download" button to start the flashing process.
- Power off your Infinix Diamond X402 completely or remove and reinsert the battery to ensure it’s in the correct mode for flashing.
- Connect your Infinix Diamond X402 to the computer using a USB cable.
- Wait for the MTK Port to appear in the device manager, indicating a successful connection.
- The flashing process will begin and take approximately 7-8 minutes. Do not disconnect the Infinix Diamond X402 during this time to avoid errors.
If you encounter any issues during the process, feel free to ask for help in the comment section below. If you’ve made a mistake while flashing, search for your Infinix Diamond X402 model on our website and follow the recovery instructions to restore your device.
| Download | Description |
|---|---|
| Stock ROM Firmware | Infinix_X402_MT6577_4.1 |
| SP Flash Tool v51824 | Tool for flashing MediaTek firmware |
| MTK USB Drivers | Drivers for MediaTek devices |
| Universal DA File | Authentication file for flashing |