Looking to install TWRP Recovery on your Infinix Note 8 X692? This step-by-step guide will help you flash the official TWRP recovery on your device easily. Whether you're a beginner or experienced, this guide is tailored to simplify the process of unlocking powerful customization features via TWRP.
⚙️ Before We Begin:
Ensure you have ADB & Fastboot drivers installed on your PC and USB Debugging enabled on your Infinix Note 8 X692. Always use the correct recovery and vbmeta files matching your build number to avoid errors during flashing.
Important Notice:
✅ Charge your Infinix Note 8 X692 to at least 50% before flashing.
❌ Do not use files from a different model or build.
š¾ Back up your data as this process will erase all content on your phone.
#TWRP #InfinixNote8X692 #CustomRecovery #RootInfinixNote8 #TWRPGuide #AndroidMods #FlashRecovery
|
š ️ Steps to Flash TWRP on Infinix Note 8 X692:
- Download the required TWRP and vbmeta.img files.
- Rename the TWRP image to
TWRP.img
and place both files in the ADB Fastboot folder. - Boot your Infinix Note 8 X692 into Fastboot Mode.
- Connect your device to the PC using a USB cable.
- Open the command prompt in the Fastboot folder and run the following commands:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img fastboot flash recovery TWRP.img fastboot reboot recovery
š After rebooting to recovery, flash the Stock boot.img
to the boot partition. Then install the custom ofox.img
to the recovery ramdisk, wipe Dalvik/cache, and reboot to system.
š” Tip: Download the full stock firmware to extract theboot.img
andvbmeta.img
files. Use only files matching your current build number.
š Download Links
- TWRP Recovery: Download from GitHub (TWRP-3.6.0_11-X692)
- ADB Fastboot Tool: Download v1.4.3
- Password: Not Required
⚠️ Disclaimer: Flashing custom recovery may void your warranty. Proceed at your own risk.