Tecno Spark 6 Go KE5 Magisk Root Unlock Bootlouder ( How To Root KE5 )

Want to root your Tecno Spark 6 Go KE5 safely? This complete guide will walk you through the process of unlocking the bootloader, flashing Magisk, and gaining root access on your Tecno Spark 6 Go KE5. All essential tools and instructions are provided below.

Before beginning, ensure that you follow the steps exactly as described. Any mistake, such as using the wrong firmware version or an incomplete patch file, may cause the device to get stuck on the logo screen or result in a soft brick.

📁 Download Root Files for Tecno Spark 6 Go KE5

Patched boot.img for Tecno Spark 6 Go KE5
vbmeta.img file
Magisk App (latest version)
ADB and Fastboot USB drivers

⚠️ Preparation: Make sure to use files compatible with your exact software version (e.g., KE5-H6123ABC-QGo-GL-210809V373). Also, charge your phone above 50% and take a complete backup of your data before proceeding.

Warning!
Rooting and unlocking the bootloader will erase all data on your Tecno Spark 6 Go KE5. Back up contacts, photos, apps, and any personal files. Using incorrect firmware files may lead to boot loop or permanent damage.

🔧 How to Root Tecno Spark 6 Go KE5 Using Magisk

Install ADB and Fastboot drivers on your Windows PC.
Extract all downloaded files using WinRAR or 7-Zip.
Enable Developer Options on your phone by tapping the Build Number in Settings > About Phone.
In Developer Options, enable both OEM Unlock and USB Debugging.
Transfer the original boot.img file and Magisk APK to your phone storage.
Install the Magisk app and patch the boot.img file.
Move the patched boot image from your phone’s Download folder to the ADB Fastboot folder on your PC.
Also copy the vbmeta.img file to the same folder.
Power off the phone and boot it into Fastboot Mode (Press Volume Up + Power key).
Connect the device to your PC via USB data cable.

💻 Run the following Fastboot commands:

fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot reboot

Your Tecno Spark 6 Go KE5 will now reboot with root access enabled. Open the Magisk app to confirm that the installation is successful.

If you encounter any problems during the rooting process or your phone enters a bootloop, you can search your phone model on our site and follow the official firmware flashing guide to restore it.

⬇️ Tecno Spark 6 Go KE5 Root Files Download

Root Files – Tested Magisk Method
Root File – KE5-H6123ABC-QGo-GL-210809V373
Download ADB & Fastboot Drivers

Firmware4mobile