Tecno Phantom X AC8 Magisk Root Unlock Bootlouder ( How To Root AC8 ) Without Twrp Recovery

If you're looking for a safe and easy way to root your Tecno Phantom X AC8, you're in the right place. In this guide, you'll learn how to unlock the bootloader, install Magisk, flash the patched boot image, and even unroot your device if needed. The complete method is free, and all required files are provided below. But remember — rooting must be done carefully. A single mistake can lead to a soft brick or boot loop.

Download everything you need right here: patched boot.img, vbmeta.img, Magisk app, and ADB & Fastboot tools. This guide works only for the AC8-H853A-R-OP-210826V1425 firmware version of Tecno Phantom X AC8. Please make sure you match the version before flashing.

⚠️ Before You Start:
Make sure your Tecno Phantom X AC8 is charged to at least 60%. Always use root files that match your phone's build number. Flashing the wrong files can lead to errors like dm-verity failed or orange state. Backup your important data — rooting will erase everything.

Warning!
Unlocking the bootloader and rooting will factory reset your device. This will delete all user data including photos, contacts, and apps. Also, do not use files meant for another model or build — doing so may cause touch not work after flash or system boot failure.

🛠️ How to Root Tecno Phantom X AC8 – Magisk Method

Install the ADB & Fastboot USB drivers on your PC.
Extract the downloaded root files using WinRAR or 7-Zip.
On your phone, go to Settings > About Phone and tap Build Number multiple times to enable Developer Options.
Enable OEM Unlock and USB Debugging in Developer Options.
Copy the boot.img and Magisk APK to your phone storage.
Install the Magisk app on your phone and patch the boot.img using it.
After patching, copy the new magisk_patched.img back to your PC's ADB folder. Also, copy the vbmeta.img to the same folder.
Power off your phone and boot into Fastboot Mode by pressing Volume Up + Power.
Use a USB cable to connect your Tecno Phantom X AC8 to the PC.

💻 Type the Following Commands in CMD:

fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot reboot

Once your phone restarts, open the Magisk app to check for root access. If installed correctly, you'll see "Magisk Installed" with full root permissions.

💡 Troubleshooting & Common Errors

Bootloop / Red States Error Hang On Tecno Logo : Flash stock ROM via SP Flash Tool.
Wifi Bluetooth Camera Not Working: Use boot.img from the exact Build Version matching firmware.
IMEI Null / No Signal: Repair IMEI using MauiMeta or SN Writer Tool.
Wating for Device: Reinstall drivers and use a different USB port.

If your device gets stuck or doesn't boot after rooting, don't worry. Visit our main site, search your model, and follow the stock firmware flashing method to fully recover your phone.

📦 Rooting Tools & Drivers – Free Download
Boot & Vbmeta – AC8-H853A-R-OP-210826V1425
ADB & Fastboot Tool Drivers

💬 Still have questions? Leave a comment on our YouTube video or support page. Whether you’re facing FRP lock, dead boot, or flashing stuck, we’re here to help you solve it step-by-step.

Firmware4mobile