Obi S506 Firmware Flash File | Fix Dead Boot, OS Errors

Obi S506 Firmware Flash File (Stock ROM) – 100% Tested

Looking to restore your Obi S506 smartphone? Whether your phone is stuck on the logo, facing a dead boot issue, or the touch is unresponsive after flashing, this tested stock firmware will help you bring it back to life. It's the official ROM and can be installed via SP Flash Tool.

Common Issues Fixed by Flashing Obi S506 Firmware

• Dead boot recovery
• After flash black screen problem
• Touch not working after flashing
• Fix "dm-verity verification failed" error
• OS corruption or fastboot stuck loop

What’s Inside the Obi S506 Firmware Package?

This firmware package is in ZIP format and includes:

• Scatter file
• Boot.img
• VBMeta
• System and userdata
• DA Auth file (if required)

⚠️ Pre-Flashing Checklist

Backup First: Flashing will erase all data including apps, contacts, and files. Ensure your personal data is backed up to a safe location.

Battery: Charge your Obi S506 to at least 50% before you begin the process.

Correct Build: Make sure the firmware you download matches your phone's build and model number exactly.

How to Flash Obi S506 Stock ROM Using SP Flash Tool

1. Download and extract the Obi S506 firmware ZIP using 7zip or WinRAR.
2. Install MTK USB drivers on your computer (see download link below).
3. Run flash_tool.exe from the SP Flash Tool folder.
4. Click "Scatter-loading" and select the scatter file from the extracted firmware folder.
5. Load DA file if required (some phones may need this).
6. Click the “Download” button in the Flash Tool interface.
7. Power off your Obi S506 completely. Remove and reinsert the battery if possible.
8. Connect the phone to your PC using a USB cable.
9. The tool will detect the device and begin the flashing process automatically.
10. Wait 7–8 minutes. Once completed, a green check mark will appear indicating success.

Obi S506 Flash File Download Links

📥 Download Obi S506 Firmware (Official ROM)

🧰 Download MTK USB Drivers for Obi S506

🛠️ Get SP Flash Tool for Obi S506

Post-Flashing Notes

If your device doesn't boot after flashing, double-check that all files were selected correctly in the Flash Tool. In some cases, flashing just the boot.img and vbmeta.img can fix issues like touch not working or a black screen.

⚠️ Disclaimer: Flashing firmware can void warranty and may permanently damage the device if done incorrectly. Proceed at your own risk. We are not responsible for any damage.