Obi S452 Plus MT6572 Firmware Stock Rom Official Rom Download & Flash Guide

Official Obi S452 Plus Firmware Download & Flash Guide

Looking to repair your Obi S452 Plus smartphone? Download the official stock ROM and firmware flash files to fix issues like dead boot, black screen after flashing, touch screen failures, and fastboot mode hang-ups. This guide provides the latest firmware and step-by-step instructions for a successful flash.

About Obi S452 Plus Firmware Package

The firmware bundle for Obi S452 Plus comes packed with essential files such as boot.img, vbmeta.img, and the scatter file required for flashing with SP Flash Tool. This official stock ROM will restore your device’s software, resolving system errors and boot issues caused by corrupted software.

Important: Before Flashing Your Obi S452 Plus

Ensure the firmware matches your phone’s exact build version. Mismatched files can cause permanent damage. Also, charge your phone battery above 50% to avoid power interruptions during the flashing process.

Firmware Details and Usage

The Obi S452 Plus is powered by a MediaTek chipset, so flashing requires the Mediatek SP Flash Tool. Firmware files are usually zipped; use extraction tools like 7-Zip or WinRAR before proceeding. Flashing with the correct scatter file ensures that your device’s partitions are correctly restored.

Warning: Flashing firmware erases all user data. Back up contacts, photos, and important files before starting the process. Avoid using unofficial or mismatched ROM versions to prevent bricking your device.

First, install the Obi S452 Plus USB drivers on your PC. Next, extract the firmware ZIP using WinRAR or 7-Zip to access the flash files.

Flashing Instructions for Obi S452 Plus Using SP Flash Tool

1. Download the Obi S452 Plus firmware and extract the package.
2. Install the necessary MediaTek USB drivers on your computer.
3. Open the flash_tool.exe in the SP Flash Tool folder.
4. Click the “Scatter-loading” button and select the MT6XXX_Android_scatter.txt file from the extracted firmware folder.
5. Load the DA/Auth files if required by the flash tool.
6. Press the “Download” button to prepare for flashing.
7. Power off your phone completely. For removable batteries, take it out and reinsert it.
8. Connect Obi S452 Plus to the PC via USB cable.
9. The device should be detected as an MTK port in Device Manager, and flashing will begin automatically.
10. Wait patiently 7-8 minutes until the process finishes. Do not disconnect the phone.
11. Once done, a green checkmark will appear. Disconnect and power on your device.

If you encounter issues during flashing, visit our comment section for support or search your device model on our site for tailored repair guides.

Download Links for Obi S452 Plus Firmware & Tools

Download Obi S452 Plus Official Stock ROM

Obi S452 Plus USB Drivers (MediaTek)

SP Flash Tool for Obi S452 Plus