Huawei JSC-AN00 Official Stock ROM Flash File – Step-by-Step Installation Guide
Is your Huawei JSC-AN00 stuck on fastboot or facing system glitches? Installing the official stock firmware can help restore your phone to its factory condition. This guide walks you through safely flashing the Huawei JSC-AN00 firmware using SP Flash Tool.
š¦ What’s Included in the Firmware Package:
- Huawei JSC-AN00 MTK Scatter Firmware
- Boot.img and vbmeta.img Files
- Secure DA/Auth Support (If Needed)
- Compatible with MediaTek SP Flash Tool
⚠️ Flashing Prerequisites
Note: Before flashing, ensure your device model and build version match the firmware. Charge your phone above 50% and back up your important files.
š§ Required Tools & Drivers:
š² How to Flash Huawei JSC-AN00 Stock ROM
- Extract the firmware using 7-Zip or WinRAR.
- Open the SP Flash Tool folder and run the
flash_tool.exefile. - Click "Scatter-loading" and browse to the
MTK_Android_scatter.txtfile in the firmware folder. - Load the DA/Auth files if the device requires secure boot authorization.
- Click on the "Download" button in the SP Flash Tool.
- Power off your phone (or remove/reinsert battery if applicable).
- Connect the Huawei JSC-AN00 to your PC via USB cable.
- The flashing process will begin automatically and complete within 7–8 minutes.
- Wait for the success confirmation and then disconnect the phone.
š Firmware Download Section
| Jessica-AN00A 10.1.1.152 C00E142R6P1 Firmware (Scatter Format) |
| SP Flash Tool – For MTK Devices |
| Download MTK USB Drivers |
š Important Reminders
Reminder: Do not interrupt the flashing process once started. If you experience issues like boot loop or stuck logo after flashing, recheck the firmware version or reload the DA/Auth file correctly.
If you're facing any issue during flashing or recovery, search for your phone model on our site and follow the updated method based on your phone’s chip version and region.
— Firmware4Mobile Support Team