Firmware Flash File for Huawei SCL-U31 – Fix Boot Issues & Restore System
Need to fix your Huawei SCL-U31 stuck on logo, showing a black screen, or not responding to touch after flashing? Download the official firmware and restore your device to factory condition using the correct flashing method.
š„ Huawei SCL-U31 Stock ROM Information
This firmware file is designed exclusively for the Huawei SCL-U31 model, featuring a MediaTek MTK chipset. The package includes scatter.txt, boot.img, system.img, and vbmeta files required for complete software installation via SP Flash Tool.
⚠️ Pre-Flash Safety Checklist
Note before flashing: Always match the firmware version with your phone’s build number. Make sure your phone battery is at least 50% charged to avoid bricking your device mid-process.
š§ Flashing Instructions for Huawei SCL-U31
- Unzip the downloaded firmware using WinRAR or 7-Zip.
- Copy the dload folder from the extracted package to your memory card (SD card).
- Turn off your Huawei SCL-U31 completely.
- Insert the SD card into your phone.
- Press both Volume Up + Volume Down and then Power button.
- Release the Power button when the Huawei logo appears, but keep holding Volume keys until the installation starts automatically.
- Wait for the flashing process to complete.
š Required Tools & Drivers
| š Huawei Y6 SCL-U31 Firmware (Android 5.1.1 – 27/08/2015) |
| š§° MTK Flash Tool v5.1812 |
| š MediaTek USB Drivers |
š” Important Advisory
Backup Notice: Flashing the stock ROM will erase all user data including apps, contacts, and internal storage. Please take a full backup before proceeding. Avoid flashing with the wrong build version.
If your device gets stuck during flashing, or you accidentally flash the wrong firmware, you can always search this site for your model again and follow the repair method safely.
— Huawei SCL-U31 Software Repair Guide