Huawei MLA-L02 Flash File – Stock ROM & Complete Flashing Instructions
Experiencing boot issues, touch glitches, or software crashes on your Huawei MLA-L02? Flashing the official firmware can fix various system problems and bring your device back to working condition. Follow the step-by-step guide below to install the stock ROM using the UMT QCfire tool.
🔍 Device Information
- Model: Huawei MLA-L02
- Firmware Build: C106B150
- OS Version: EMUI 5.0
- Processor: Qualcomm
- Flash Tool: UMT QCfire or compatible Qualcomm tool
📦 Required Files
⚠️ Important Notice Before Flashing
Note: Flashing firmware will erase all internal data. Ensure you back up your device and use the correct firmware version to match your MLA-L02 model. Charge your phone above 50% before proceeding.
🧰 What You Need
- Windows PC or Laptop
- USB Cable
- Firmware files (extracted)
- UMT QCfire Tool
- Access to EDL/Test Point mode
🔧 How To Flash Huawei MLA-L02
- Install Qualcomm USB drivers on your PC.
- Extract the downloaded firmware using WinRAR or 7-Zip.
- Open UMT QCfire Tool.
- Boot the device into EDL mode by shorting the test point with GND, then connect the USB cable.
- Load the appropriate XML file from the extracted firmware folder.
- Click on the Flash button to begin installation.
- Wait for the process to complete. The phone will reboot automatically.
🖼 Huawei MLA-L02 Test Point
📁 Firmware File Information
| MLA-L02C106B150 EMUI 5.0 Official ROM |
| Qualcomm USB Drivers for MLA-L02 |
This guide is provided for advanced users and technicians. Proceed carefully and ensure proper firmware selection based on your device build number.