📱 Download Huawei KIW-L24 Firmware Flash File | Stock ROM & Repair Guide
Is your Huawei KIW-L24 stuck on the logo screen, not responding to touch, or showing a black screen after flashing? Don’t worry—this official firmware file helps you restore your phone to its original working state. Whether you’re dealing with software corruption, bootloop, or fastboot stuck issues, this guide will walk you through the full flashing process safely.
📁 Firmware Information
| Device | Huawei KIW-L24 |
| Build Version | KIW-L24C567B331 |
| Android Version | 6.0.1 |
| File Size | 1.6 GB |
| Status | Free Download (No Password) |
| Download Link | Click to Download |
🧰 Required Tools
- Qualcomm USB Drivers
- UMT QCfire Tool (or supported Qualcomm flashing tool)
- WinRAR or 7-Zip to extract firmware files
⚠️ Important Precautions
Warning: Flashing will erase all data from your device. Please backup your contacts, media, and important data before proceeding. Always verify the build version to match your device.
🔧 Step-by-Step Flashing Instructions
- Install Qualcomm USB drivers on your computer.
- Extract the downloaded firmware using WinRAR or 7-Zip.
- Open the UMT QCfire tool.
- Put the phone into EDL/Test Point mode by shorting the test point with ground.
- Connect the phone to the PC via USB.
- Load the XML firmware files into the UMT QCfire flashing section.
- Click the "Flash" button to begin installation. Wait until the process completes.
📸 Huawei KIW-L24 Test Point Image
Short the test point to ground to enter EDL mode.
✅ Final Thoughts
Using the official Huawei KIW-L24 stock ROM, you can resolve many software problems like boot loops, fastboot stuck, touch issues after flashing, or system failure. Make sure to use a good quality USB cable and do not interrupt the process once started.