š„ Firmware Flash File for Huawei KIW-AL10 – Official Stock ROM Download & Flash Guide
If your Huawei KIW-AL10 is stuck on the logo, not booting properly, or showing touch issues after flashing, you're in the right place. This official stock ROM firmware helps restore your device to its original condition and resolve common software faults like black screen, fastboot mode errors, or failed verity verification.
š Important Notes Before Flashing
Warning: Flashing will erase all your personal data. Please back up your phone before proceeding. Also, ensure the firmware version matches your device model to avoid any compatibility issues.
š§ Flashing Guide for Huawei KIW-AL10
- Install Qualcomm USB drivers on your PC
- Extract the firmware package using WinRAR or 7-Zip
- Launch UMT QCfire Tool on your computer
- Put your device into EDL mode using the test point (see image below)
- Connect the device to PC using USB cable
- Load XML file from the firmware folder into the flashing tool
- Click the Flash button to begin installation
š· Huawei KIW-AL10 Test Point (EDL Mode)

Use tweezers to short test point with ground to enter EDL mode.
✅ Firmware Info – Huawei KIW-AL10
Device Model | Huawei KIW-AL10 |
Firmware Version | KIW-AL10C92B430 (China) |
Android OS | 6.0.1 Marshmallow |
File Size | 1.05 GB |
Password | www.firmwarecn.com |
Download | Download Firmware |
š What You Need
- Qualcomm USB Drivers
- UMT QCfire Tool (or compatible tool)
- WinRAR or 7-Zip to extract firmware
š Conclusion
Flashing your Huawei KIW-AL10 with the correct stock firmware can fix most software-related problems including black screen, touch issues, boot loops, and dead boot recovery. Follow the instructions carefully and always match the firmware version with your phone model for a successful flash.