📥 Download Huawei G7-L11 Official Stock ROM Firmware (Flash File)
Looking to restore your Huawei G7-L11 to factory condition? Whether your phone is stuck on logo, showing a black screen, or touch is not working after flashing — this official firmware and guide will help you fix software-related problems and perform a successful flash.
🔧 Common Issues Solved with This Firmware
- Fix black screen after flash
- Touch not working problem
- dm-verity verification failed
- Stuck on Fastboot or recovery loop
- Dead boot recovery (Qualcomm-based)
⚠️ Before You Flash
Important:
Flashing firmware will erase all user data. Please backup your contacts, apps, and internal storage before starting. Ensure the firmware build matches your device’s version. Incorrect firmware can brick your phone.
📲 Step-by-Step Flash Guide for Huawei G7-L11
- Install Qualcomm USB drivers on your PC
- Extract the downloaded firmware using 7-Zip or WinRAR
- Launch the UMT QCfire Tool
- Boot your phone into EDL mode using Test Point (see image below)
- Connect phone to PC via USB cable
- Load XML files from firmware folder into UMT tool
- Click Flash to begin firmware installation
🧪 Huawei G7-L11 Test Point (EDL Mode)
Use the test point method above to enter EDL mode (emergency download mode) on the Huawei G7-L11.
📁 Huawei G7-L11 Firmware Information
| Model | Huawei Ascend G7-L11 |
| Build Version | G7-L11C185B510 |
| File Size | 2.2 GB |
| Format | Readed Full Firmware (UMT) |
| Password | qwrhddqcrg |
| Download | Download Firmware |
🛠 Tools Required
- Qualcomm USB Drivers
- UMT QCfire Tool or similar
- 7-Zip or WinRAR for file extraction
📌 Conclusion
This official Huawei G7-L11 stock firmware is ideal for repairing software corruption, solving boot problems, and restoring your phone to factory state. If you're facing software crashes or flashing-related errors, using this tested flash file with the proper tool can save your device.