How to Root Tecno Spark 6 Go KE5K Magisk Root Unlock Bootlouder

Mr Mobile
0

Looking to root your Tecno Spark 6 Go KE5K safely and without bricking your phone? You’re in the right place. This step-by-step Magisk Root guide will help you unlock the bootloader, patch the boot image, and fix common issues like black screen after root, touch not working, and dm-verity verification failed.

How to Root Tecno Spark 6 Go KE5K Magisk Root Unlock Bootlouder

šŸ“„ Tecno Spark 6 Go KE5K Root Files (Boot & Vbmeta Downloads)

Note: Always match your firmware version (e.g. V241, V236, etc.) when downloading root files. Using a mismatched boot file can result in bootloop or device stuck in Fastboot mode.

⚠️ Warning: Rooting will erase all data on your phone. Please back up important files before proceeding. Do not use root files from a different build number, or your phone may get soft-bricked.

šŸ› ️ How to Root Tecno Spark 6 Go KE5K using Magisk (No TWRP Needed)

  1. Install ADB & Fastboot drivers on your Windows PC.
  2. Download the correct boot.img and vbmeta.img for your build version and extract them.
  3. Enable Developer Options: Settings → About Phone → Tap Build Number 7 times.
  4. In Developer Options, enable OEM Unlock and USB Debugging.
  5. Transfer the boot.img to your phone and open Magisk App to patch it.
  6. After patching, move the new magisk_patched.img back to your PC's ADB folder along with vbmeta.img.
  7. Boot the phone into Fastboot Mode: Turn off → Press and hold Volume Up + Power → Choose “Reboot to Bootloader”.

šŸ“Ÿ Fastboot Commands:

fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched.img
fastboot reboot

Once the device reboots, open Magisk and verify root access. You're now rooted successfully!

šŸš‘ Common Post-Root Issues and Fixes

  • Black Screen after root? Flash correct boot.img and vbmeta.img again.
  • Camera not responding? Wrong patched file – use exact build boot image.
  • Device stuck in Fastboot mode? Restore stock firmware via SP Flash Tool.
  • dm-verity verification failed? Ensure you used --disable-verity in your vbmeta flash command.

If you run into serious problems or your phone doesn’t boot, you can visit our website and search for your device firmware to reflash and restore it.

Need help? Drop a comment or visit our support page. We regularly assist with FRP removal, IMEI repair, dead boot fix, and flashing errors.

Tags

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!