š„ Huawei ATU-L23 Stock Firmware Flash File – Official ROM & Installation Guide
If your Huawei ATU-L23 is stuck on fastboot mode, facing touch issues, or booting errors after a failed update—this official firmware flash file is your solution. Restore your smartphone’s original software and fix critical errors like black screen or boot loop using this tested ROM.
š Common Software Issues Fixed
- Fastboot stuck issue
- Black screen after flash
- Touch not responding
- OS not booting (bootloop)
- dm-verity verification failed
š Huawei ATU-L23 Firmware Info
Model: | Huawei ATU-L23 |
Firmware Version: | 8.0.0.164 (EMUI 8.0) |
Build Number: | C605CUSTC605D1 |
Android OS: | Android 8.0 Oreo |
File Type: | Official ZIP Package |
Download Link: | Download Firmware |
⚠️ Important Guidelines Before Flashing
✔ Ensure the flash file matches your phone’s build number.
✔ Charge the device above 50% to avoid power loss during flashing.
✔ Backup all important data—flashing will erase everything on the device.
✔ Extract the firmware package using WinRAR or 7-Zip.
š§° Required Tools & USB Drivers
- Qualcomm USB Drivers – Download
- UMT QCfire Tool or similar Huawei flashing tool
- Firmware Extraction Utility (7-Zip / WinRAR)
š§ Step-by-Step Flashing Instructions for Huawei ATU-L23
- Download and extract the firmware ZIP file on your computer.
- Install USB drivers to ensure proper phone detection.
- Run the UMT QCfire tool as Administrator.
- Use tweezers or metal to short the test point to the ground.
- Connect your phone to the PC via USB (this will put the phone into EDL mode).
- Load the XML firmware files into the tool’s flashing section.
- Click on “Flash” and wait until the process is complete.
š· Huawei ATU-L23 Test Point Pinout (For EDL Mode)

š« Disclaimer
This guide is intended for trained technicians or advanced users. Flashing firmware may void your warranty or damage the device if done incorrectly. Always proceed with caution and double-check your phone’s build version. We are not responsible for any issues that arise during or after the flashing process.