🔧 Huawei AGS-L09 Official Firmware Flash File (Stock ROM)
If your Huawei AGS-L09 tablet is stuck on the logo, fastboot mode, or facing software issues like a non-working touch screen or black screen after flashing, this official stock ROM can help restore it to working condition. Use this tested and secure firmware package to fix all major Android system problems.
📌 Huawei AGS-L09 – Firmware Details
| Device Model: | Huawei AGS-L09 |
| Processor: | Qualcomm Snapdragon |
| Firmware Version: | EMUI 8.0.0.133 |
| File Size: | 4.07 GB |
🧰 Fixable Problems Using This Firmware
- Huawei AGS-L09 stuck on Huawei logo
- Fastboot screen stuck or boot failure
- Touch screen not working after flashing
- dm-verity verification failed error
- Dead boot or OS not loading
⚠️ Precautions Before You Flash
- Fully charge your Huawei AGS-L09 before starting
- Always use the correct firmware version for your model
- Flashing will erase all data – backup your files first
⬇️ Download AGS-L09 Firmware & Drivers
|
✅ Firmware: AGS-L09 EMUI 8.0.0.133 📥 Download Firmware 💾 Qualcomm Drivers: 📥 Download USB Drivers |
🛠️ How to Flash Huawei AGS-L09 via UMT QCfire
- Install Qualcomm USB drivers on your computer.
- Extract the firmware ZIP using 7Zip or WinRAR.
- Launch the UMT QCfire tool on your PC.
- Use the test point method to put AGS-L09 into EDL mode (see image below).
- Connect the device to your PC via USB while holding the test point to ground.
- Load the extracted XML firmware files into UMT QCfire.
- Click on Flash to begin software installation.
Huawei AGS-L09 Test Point for flashing mode (EDL ISP pinout)
💡 Helpful Tip
If the flash doesn't start or the device isn't detected, make sure the drivers are installed properly and the USB cable/port is working. Always double-check the model and firmware compatibility.
Disclaimer: Flashing your device is at your own risk. Follow instructions carefully. The provided firmware is for repair and educational purposes only.