📥 Huawei ATH-AL00 (Honor 7i) Official Firmware Flash File – EMUI 3.1 Stock ROM
If your Huawei ATH-AL00 (also known as Honor 7i) is facing software issues such as stuck on logo, fastboot screen, touch not responding after flash, or OS error, then this post will help you restore the device with the official stock firmware.
🔧 Issues You Can Fix with This Stock Firmware
- Operating system errors
- Device not turning on due to software crash
- Fastboot screen stuck
- Touchscreen not working after software update
📦 Firmware File Info – Huawei ATH-AL00
Model Name: | Huawei ATH-AL00 (Honor 7i) |
Build Version: | EMUI 3.1 / Android 5.1.1 |
File Format: | UPDATE.APP + XML |
Chipset: | Qualcomm |
⚠️ Important Preparation Before Flashing
- Ensure the battery is charged above 50% to avoid interruption.
- Match the firmware file with your phone’s exact build number.
- Back up personal data—flashing will erase all internal storage.
🛠️ Step-by-Step Flashing Instructions
- Download and extract the stock firmware using 7Zip or WinRAR.
- Install Qualcomm USB drivers on your PC if not already installed.
- Open the UMT QCfire tool or any supported Huawei tool.
- Use the image below to short the test point on the motherboard and connect USB to PC:

- Load the XML file from the extracted firmware folder into the flashing tool.
- Click the “Flash” button to begin the firmware installation.
💡 Firmware and Driver Download Links
Download ATH-AL00 Stock ROM – EMUI 3.1 Official Dload Package |
Download Qualcomm USB Drivers |
📌 Final Advice
Always double-check the firmware version that matches your specific build number before starting the process. If your Huawei ATH-AL00 still doesn't respond after flashing, make sure you're using a fully charged battery and the correct XML flashing configuration.