Facing trouble with your Tecno Camon 17 CG6? Whether it’s not turning on or completely dead after a failed update, this official firmware package is your reliable fix! ⚙️ Restore your device to factory condition and solve all major software problems quickly and safely. 🧩
📋 Firmware Overview
- Device Model: Tecno Camon 17 (CG6)
- Chipset: MediaTek Helio G85 – MT6769V
- Firmware Format: Scatter + Secure DA File
- Android Version: Android 11 (HiOS)
- Status: 100% Tested & Verified ✅
🛠️ Issues This Firmware Can Solve
- 🌀 Boot stuck or logo hang problem
- 💀 Device not powering on (dead boot)
- 📶 No network or baseband unknown
- 🔁 Auto-reboot or freezing after boot
- 🔓 Locked or crashed system recovery
⚙️ How to Flash Firmware on Tecno Camon 17
- Install MTK VCOM drivers for Windows
- Download extract SP Flash Tool
- Load the
MT6769_Android_scatter.txtfile in SP Flash Tool - Select the DA File from the package for secure boot
- Click “Download” ➡️ then connect switched-off phone via USB
- Wait for green success tick ✔️
🧠 Important Tips Before Flashing
- 🔋 Make sure the battery is charged to at least 60%
- 💾 Always take a backup of internal data (flashing wipes everything)
- ⚠️ Use correct firmware specific to your model (CG6)
❓ Frequently Asked Questions
Is this file safe to flash on Tecno Camon 17 CG6?
✅ Yes, it’s officially tested on the CG6 variant with MT6769 chipset.
Will this fix dead phone issues?
💡 Yes, it resolves dead boot due to software crash or incorrect flashing.
What tool should I use to flash?
🛠️ SP Flash Tool is the most recommended utility for flashing this firmware.
📌 Disclaimer
All files provided are freely available from the internet and are intended for repair and research purposes only. We do not host or modify these files. Flashing is risky — do so only if you understand the process. The author is not responsible for any damage that may occur. 🔒
Download the necessary tools and drivers:
MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824