How to Root Tecno Spark 4 KC2 Magisk Root Unlock Bootlouder

If you're looking to root your Tecno Spark 4 KC2 safely and without any paid tool, you’re at the right place. In this guide, we’ll show you how to install Magisk on your device, unlock the bootloader, and flash the patched boot image to gain full root access.

This method is tested and works without TWRP recovery. But be careful—rooting the wrong way can cause serious problems like dm-verity verification failed, after root touch not working, or even fastboot mode stuck. So, follow each step with full attention.

⚠️ Important: Always use the boot and vbmeta files matching your build version. Using wrong versions may result in after flash black screen or dead boot issue.

🔧 How to Root Tecno Spark 4 KC2 using Magisk

1. Install ADB & Fastboot drivers on your Windows PC.
2. Extract the downloaded KC2 Boot & Vbmeta zip using WinRAR or 7Zip.
3. Go to your phone Settings → About → Tap “Build Number” 7 times to enable Developer Options.
4. Now in Developer Options, enable OEM Unlock and USB Debugging.
5. Transfer boot.img and Magisk.apk to the phone’s internal storage.
6. Install the Magisk app and select “Patch Boot Image.” Save the patched image.
7. Copy the patched boot.img file from the phone to your PC’s ADB/Fastboot folder. Also copy vbmeta.img there.
8. Now boot your phone into Fastboot Mode: Power off → Hold Volume Up + Power → Select “Reboot to Bootloader.”

💻 Enter These Commands in CMD:

fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched.img
fastboot reboot

Once your device restarts, open Magisk to confirm root access. That’s it — your Tecno Spark 4 KC2 is now rooted!

🔄 Post-Root Problems & Fixes

• Dead screen after root? Flash correct boot.img again.
• Wifi not working? Use stock boot.img of exact firmware version.
• Stuck on fastboot mode? Perform clean firmware flash using SP Flash Tool.
• dm-verity error? Make sure vbmeta.img is flashed with --disable-verity flag.

📢 If your phone is bricked or soft-dead after rooting, don’t worry. Visit our homepage and search “Tecno Spark 4 KC2 firmware” to find a complete flashing guide that can recover your phone.

🔗 Download Tools & Root Files

BOOT + VBMETA File – KC2

ADB Fastboot Tool – Driver Installer

If you have any questions, feel free to comment below or contact us through our support page. We regularly help users with issues like FRP removal, dead boot repair, IMEI fix, and system mount error after flashing.