If your Vivo Y55 PD1613F is stuck in fastboot mode, showing a black screen after flashing, or facing software glitches, then this stock ROM can help fix those issues. The flash file provided below is the official firmware that supports complete OS restoration.
Common Issues Fixed by Flashing
- Black screen after flashing
- Touchscreen not working
- DM-Verity verification failed
- Stuck on Vivo logo or Fastboot mode
- Dead boot recovery
Preparation Before You Flash
Ensure the firmware version you are flashing matches your exact Vivo Y55 PD1613F build number. Charge your battery to at least 60% and take a full data backup because flashing will erase everything on your device.
Firmware Download Links
| Stock ROM: | PD1613F_EX_A_1.21.4_Firmware |
| Flash Tool: | QPST Flash Tool |
| USB Drivers: | Qualcomm USB Drivers |
Step-by-Step Flashing Method (Using QFIL)
- Install Qualcomm USB drivers on your computer.
- Extract the downloaded firmware using 7-Zip or WinRAR.
- Open QFIL and select Flat Build mode.
- Browse and load
prog_emmc_firehose_*.mbnfile from the extracted folder. - Click "Load XML" and choose
rawprogram.xmlfollowed bypatch.xml. - Power off the device, enter EDL mode using the test point method, then connect it via USB.
- When Qualcomm port appears, click "Download" in QFIL to start flashing.
Important Notes
Warning: This process will erase all user data. Make sure to back up personal data and double-check your firmware build to avoid bricking your phone.
For any help or error during flashing, comment on our videos or search your phone model on Firmware4Mobile.com for recovery tutorials.