Vivo Y37 PD1503F Firmware File (ROM) – Fix Bootloop, Dead Boot, Fastboot Stuck
Looking to repair your Vivo Y37 PD1503F? If your device is not turning on, stuck in fastboot, showing a black screen, or the touch is unresponsive after flashing – this page will help you restore your device using the official firmware and QFIL Flash Tool. Download links and a full step-by-step flashing guide are provided below.
✅ Issues Fixed with This Vivo Y37 PD1503F Firmware
- Stuck on Vivo logo or bootloop
- Touch not working after update
- dm-verity verification failed
- Fastboot mode stuck or hard brick
- Black screen after flashing
- Dead boot issue (no power, no vibration)
⚠️ Before You Begin Flashing
Important: Make sure you download the exact firmware version for Vivo Y37 model number PD1503F. Using the wrong build may lead to permanent boot issues. Charge your phone battery above 60% before flashing and back up all important files.
📁 Firmware Details – Vivo Y37 PD1503F
- Device: Vivo Y37
- Model: PD1503F
- Chipset: Qualcomm
- File Type: .mbn + .xml (QFIL Supported)
- Tool Required: QFIL Tool (from QPST package)
🔧 Required Tools for Flashing
📥 Vivo Y37 PD1503F Flash File Download
| Firmware Name |
|---|
| PD1503F_EX_A_2.5.23 (Official Stock ROM) |
🔍 How to Flash Vivo Y37 PD1503F with QFIL Tool
- Install Qualcomm USB drivers on your PC.
- Download and extract both the firmware file and QFIL tool using WinRAR or 7-Zip.
- Run QFIL from the QPST folder and choose Flat Build mode.
- Click "Browse" and select
prog_emmc_firehose_8916.mbnfrom the firmware folder. - Click “Load XML” and select
rawprogram.xmlfirst, thenpatch.xml. - Power off the Vivo Y37. Use test point to enter EDL (Emergency Download) mode.
- Once detected in Device Manager, press “Download” in QFIL to start flashing.
- Wait until the success message appears. Your phone will reboot automatically.
📌 Flashing Tips & Troubleshooting
- 💡 Touch Not Working After Flash? Reflash using correct build version or try alternative touch firmware patch.
- 💡 Phone Not Detected in QFIL? Confirm EDL mode and driver installation.
- 💡 Bootloop after Flash? Perform a factory reset after flashing via recovery mode.
🧠 FAQs – Vivo Y37 PD1503F Flash File
Is this firmware official?
Yes, this is the original stock ROM provided for Vivo Y37 PD1503F Qualcomm variant.
Is this file password protected?
No, the flash file is password-free. You can extract it directly using 7-Zip or WinRAR.
How to enter EDL/Test Point mode on Vivo Y37?
You will need to open the back cover and short two points on the board. Search "Vivo Y37 PD1503F EDL test point" for exact location.
Will this delete my data?
Yes. Flashing firmware will erase all phone data. Back up contacts, photos, and apps before proceeding.
Can this fix a dead phone?
If the phone is detected in EDL mode, yes – this firmware can revive the device.
💬 Need Help?
If you encounter any problems during download or flashing, feel free to leave a comment below. You can also search your model on Firmware4Mobile.com to find more guides and flash files.