Vivo S1 PD1913F MT6768 Firmware Flash File | | DA File Included for Secure Flashing

MR MOBILE
0

Vivo S1 Firmware Flash File (PD1913F) | Official Stock ROM MT6768

If your Vivo S1 (PD1913F) is stuck on the logo, showing black screen after flashing, or facing dm-verity verification failed, then flashing the official firmware can restore your device. On this page, you can download the latest Vivo S1 flash file, along with the modified SP Flash Tool, DA file, USB drivers, and a complete flashing guide.

šŸ› ️ Problems Fixed by Vivo S1 Firmware

  • Fix Fastboot mode stuck issue
  • Dead boot or hang on logo fix
  • Touch not working after flashing solution
  • Remove dm-verity verification error
  • Fix software errors or boot crash

⚠️ Important Precautions Before Flashing

Always ensure the firmware matches the exact model: Vivo S1 PD1913F with MT6768 chipset. Charge the battery above 50%. Flashing will wipe all user data—take a complete backup.

šŸ“‹ How to Flash Vivo S1 Firmware (Step-by-Step Guide)

  1. Install MediaTek USB Drivers on your Windows PC.
  2. Extract the firmware and tools using 7-Zip or WinRAR.
  3. Open the MCT Bypass Tool and click on "Bypass."
  4. Power off the Vivo S1 completely.
  5. Press and hold both volume up and volume down buttons together.
  6. Connect the phone to the PC via USB cable.
  7. Wait for MTK Port to appear in Device Manager.
  8. Now launch SP Flash Tool and set connection mode to UART.
  9. Select the same COM port as shown in Device Manager.
  10. Load the DA file into Download Agent section.
  11. Load the MT6768_Android_scatter.txt from the firmware folder.
  12. Click on the green “Download” button to begin flashing.

✅ After flashing is complete, the phone will reboot automatically.

šŸ“¦ Vivo S1 Flash File + Tool Download Links

FileDownload
šŸ“ Firmware: Vivo S1 PD1913F_EX_A_8.71.19 Download
šŸ› ️ SP Flash Tool (Modified Version) Download
šŸ”Œ MediaTek USB Drivers Download

❓ Frequently Asked Questions (FAQ)

  • Q: Is this the official firmware for Vivo S1?
    A: Yes, this is the factory-signed ROM for PD1913F.
  • Q: Will this firmware remove FRP lock?
    A: No, this ROM does not remove FRP. It's for software repair only.
  • Q: What chipset does Vivo S1 PD1913F use?
    A: It uses the MediaTek MT6768 chipset.

šŸ–¼️ Vivo S1 Test Point Image (PD1913F)

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!