Vivo Y15S PD1304DW MT6580 Flash File Firmware Rom - | Unbrick Dead Device After Root Failure

MR MOBILE
0

Vivo Y15S Firmware Flash (PD1304DW_MT6580) | Official Stock ROM

Having trouble with your Vivo Y15S? If your device is stuck at the boot logo, not powering on, or showing a dm-verity verification failed error, flashing the correct firmware can restore it. Here, you can download the official Vivo Y15S flash file (PD1304DW), including the DA file, SP Flash Tool, and MTK USB drivers to repair dead boot or software issues.

🛠️ Issues Fixed by Flashing Vivo Y15S

  • Fix stuck on logo or bootloop issue
  • Repair dead boot after failed OTA
  • Resolve touch not working after flashing
  • Fix fastboot stuck or software crash
  • Bypass dm-verity errors and system verification failed

⚠️ Important Tips Before Flashing

Always verify the correct model number (Vivo Y15S PD1304DW) and chipset (MT6580). Ensure your phone has more than 50% battery and back up all data, as flashing will erase everything.

📋 How to Flash Vivo Y15S Using SP Flash Tool

  1. Install MediaTek USB Drivers on your Windows PC.
  2. Extract the firmware zip and SP Flash Tool with 7zip or WinRAR.
  3. Open SP Flash Tool and click Scatter-loading.
  4. Select MT6580_Android_scatter.txt from the firmware folder.
  5. Load the DA Auth file if required for the MTK secure boot device.
  6. Click the green Download button on the tool.
  7. Turn off your phone and hold the volume down key.
  8. Connect your Vivo Y15S via USB. Flashing will start automatically.

🔄 After flashing, the phone will reboot automatically. The first boot may take a few minutes—please be patient.

📦 Vivo Y15S Firmware & Flash Tool Download

ComponentDownload Link
📁 Vivo Y15S Firmware (PD1304DW_MT6580) Download
🧰 SP Flash Tool v5.1812 Download
🔌 MediaTek USB Drivers Download

❓ Frequently Asked Questions

  • Q: Will this firmware work for Vivo Y15S 3G or 4G?
    A: This file is for MT6580 variant only. Please match the model and chipset first.
  • Q: My device is dead, will this revive it?
    A: If it's a software issue or corrupted ROM, yes. Hardware faults need board repair.
  • Q: Is this official ROM or a custom file?
    A: This is the original factory-signed stock ROM for PD1304DW.

إرسال تعليق

0 تعليقات

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!