Vivo Xplay 3S PD1303F Firmware Flash File | Fix Fastboot Mode Stuck in Snapdragon Phones

MR MOBILE
0

If your Vivo PD1303F (Xplay 3S) is bricked, stuck on the logo screen, or showing a black screen after power on, the official Vivo PD1303F Stock ROM can help restore your phone. This tested QFIL flash file resolves software-related problems like dm-verity verification failed, system crashes, or no display issues.

🛠 Problems Fixed by Vivo PD1303F Firmware Flash File

  • Bootloop or stuck-on-Vivo logo issue
  • After flash: touch not working problem
  • Black screen or display not responding
  • Fastboot mode stuck issue
  • dm-verity verification failed error
  • Dead boot or no power bootloader recovery

⚠️ Important Instructions Before Flashing

🔋 Ensure the Vivo PD1303F battery is at least 50% charged.
✅ Only use firmware that matches your phone’s exact model and build version.
💾 Take a full backup — all user data will be erased after flashing.

📲 How to Install Stock ROM on Vivo PD1303F Using QFIL Tool

  1. Extract the PD1303F firmware ZIP file using 7-Zip or WinRAR.
  2. Download and install Qualcomm USB Drivers on your PC.
  3. Launch the QPST/QFIL Tool and select Flat Build.
  4. Click Browse to load the file: prog_emmc_firehose_*.mbn from firmware folder.
  5. Click on Load XML → Select rawprogram.xml and then patch.xml.
  6. Put the Vivo PD1303F into EDL Mode using Test Point or suitable EDL cable.
  7. Check Device Manager – it should show Qualcomm HS-USB QDLoader 9008.
  8. Click on the Download button in QFIL to begin flashing.
  9. Wait until the flashing is complete and reboot the phone.

🔄 After successful flashing, your Vivo PD1303F should boot normally with working touch, display, and original system files restored.

📂 Vivo PD1303F Firmware File & Tool Downloads

Download DescriptionLink
📁 PD1303F Official Stock ROM (QFIL Supported) Download Firmware
🛠 QPST Flash Tool (QFIL Included) Download Tool
🖥 Qualcomm USB Drivers Download Drivers

❓ Vivo PD1303F Flash File – FAQs

  • Q: Does this file fix a dead Vivo PD1303F?
    A: Yes. If the device is in EDL mode, this file can recover dead boot via QFIL.
  • Q: What if my phone restarts again on the logo after flashing?
    A: Reflash using the exact same build version. If issue persists, try other builds at Firmware4Mobile.com.
  • Q: Is this an official Vivo firmware?
    A: Yes. It is an official stock ROM released for service center-level repair.

إرسال تعليق

0 تعليقات

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!