Vivo Xplay 3S PD1303F Firmware Flash File | Fix Fastboot Mode Stuck in Snapdragon Phones

If your Vivo PD1303F (Xplay 3S) is bricked, stuck on the logo screen, or showing a black screen after power on, the official Vivo PD1303F Stock ROM can help restore your phone. This tested QFIL flash file resolves software-related problems like dm-verity verification failed, system crashes, or no display issues.

🛠 Problems Fixed by Vivo PD1303F Firmware Flash File

• Bootloop or stuck-on-Vivo logo issue
• After flash: touch not working problem
• Black screen or display not responding
• Fastboot mode stuck issue
• dm-verity verification failed error
• Dead boot or no power bootloader recovery

⚠️ Important Instructions Before Flashing

🔋 Ensure the Vivo PD1303F battery is at least 50% charged.
✅ Only use firmware that matches your phone’s exact model and build version.
💾 Take a full backup — all user data will be erased after flashing.

📲 How to Install Stock ROM on Vivo PD1303F Using QFIL Tool

1. Extract the PD1303F firmware ZIP file using 7-Zip or WinRAR.
2. Download and install Qualcomm USB Drivers on your PC.
3. Launch the QPST/QFIL Tool and select Flat Build.
4. Click Browse to load the file: prog_emmc_firehose_*.mbn from firmware folder.
5. Click on Load XML → Select rawprogram.xml and then patch.xml.
6. Put the Vivo PD1303F into EDL Mode using Test Point or suitable EDL cable.
7. Check Device Manager – it should show Qualcomm HS-USB QDLoader 9008.
8. Click on the Download button in QFIL to begin flashing.
9. Wait until the flashing is complete and reboot the phone.

🔄 After successful flashing, your Vivo PD1303F should boot normally with working touch, display, and original system files restored.

📂 Vivo PD1303F Firmware File & Tool Downloads

Download Description	Link
📁 PD1303F Official Stock ROM (QFIL Supported)	Download Firmware
🛠 QPST Flash Tool (QFIL Included)	Download Tool
🖥 Qualcomm USB Drivers	Download Drivers

❓ Vivo PD1303F Flash File – FAQs

• Q: Does this file fix a dead Vivo PD1303F?
  A: Yes. If the device is in EDL mode, this file can recover dead boot via QFIL.
• Q: What if my phone restarts again on the logo after flashing?
  A: Reflash using the exact same build version. If issue persists, try other builds at Firmware4Mobile.com.
• Q: Is this an official Vivo firmware?
  A: Yes. It is an official stock ROM released for service center-level repair.