Vivo PD1709F Flash File | Fix Fastboot Mode Bootloop Problem
Is your Vivo PD1709F stuck on the Fastboot logo and not booting into the system? This is a common issue that can occur after incorrect flashing or OTA update failure. Thankfully, flashing the correct stock ROM using QFIL can easily fix this issue.
Symptoms of Fastboot Mode Error in Vivo PD1709F:
- Phone stuck on "Fastboot" screen and not booting into OS
- No recovery or bootloader access
- Volume + Power brings Fastboot again
Possible Causes:
- Flashing wrong firmware
- Incomplete OTA update
- Corrupt boot or recovery partition
Tip: Use only QFIL Tool and the exact PD1709F build version matching your phone to fix this.
Required Files to Fix Fastboot Mode:
| PD1709F_EX_A_1.12.10_Firmware |
| QPST Flash Tool (QFIL) |
| Qualcomm USB Drivers |
How to Flash Vivo PD1709F and Fix Fastboot Bootloop:
- Install Qualcomm USB Drivers and QPST Tool on your Windows PC
- Extract the firmware using WinRAR or 7-Zip
- Open QFIL Tool and select
Flat Build - Click Browse and load
prog_emmc_firehose_xxx.mbnfile - Click Load XML and select
rawprogram.xmlandpatch.xml - Switch phone to EDL Mode using test point or ADB (if accessible)
- Connect to PC – ensure it’s detected as “Qualcomm HS-USB QDLoader 9008”
- Click on Download to start flashing process
After Flashing Vivo PD1709F:
- The phone will reboot automatically
- First boot may take 5–10 minutes
- If stuck again, try a different firmware version or clean all partitions
Flashing the full stock ROM will not only fix Fastboot stuck issues but also resolve problems like no boot, black screen, and dm-verity errors.
Visit Firmware4Mobile.com for more model-specific fixes and test point images.
Tags: Vivo PD1709F Fastboot Stuck, Vivo Bootloop Fix, Qualcomm Flash, QFIL Firmware Flash, Vivo PD1709F Dead Boot Repair