Vivo V5 PD1612F MT6750 Firmware | Flash File for Non-Volatile Memory Repair

MR MOBILE
0

Firmware Vivo V5 PD1612F | Stuck on Fastboot Mode Error

Looking for the original Vivo V5 PD1612F firmware flash file? If your device is stuck on Fastboot Mode or shows errors like “dm-verity verification failed,” you can fix it here. This post provides the official scatter firmware, DA/Auth file, and a tested flashing method using SP Flash Tool.

Why Vivo V5 PD1612F Gets Stuck in Fastboot Mode?

  • Incomplete or corrupted flashing attempt
  • Wrong firmware version used
  • dm-verity corruption after root or OTA
  • System.img or vbmeta.img mismatch

This issue can be easily fixed by flashing the correct stock ROM using the instructions provided below.

Things You Must Check Before Flashing

Important: Match the firmware build with your phone version (PD1612F). Fully charge your battery and use the original USB cable. Don’t skip the DA/Auth file if prompted by the tool.

Firmware Details

Vivo V5 PD1612F Official ROM Info
Model:Vivo V5 PD1612F
Chipset:MediaTek MT6750
Firmware Type:Scatter Flash File
Tool Required:SP Flash Tool (with DA file)
Issue Fixed:Stuck on Fastboot Mode, Dead Boot, Touch not working

Step-by-Step: How to Flash Vivo V5 PD1612F with SP Flash Tool

  1. Install MediaTek USB Drivers on your computer.
  2. Extract the downloaded ROM package using 7-Zip or WinRAR.
  3. Open SP Flash Tool.
  4. Load the scatter.txt file from the firmware folder.
  5. If DA/Auth is required, load the DA file (included in the package).
  6. Click “Download” button in the tool.
  7. Power off your Vivo V5 PD1612F and connect it while holding the volume down button.
  8. Flashing will begin automatically and complete within minutes.

Download Links

Vivo V5 PD1612F Firmware and Tools
Download Vivo V5 PD1612F Firmware
Download SP Flash Tool
Download MediaTek USB Drivers

⚠️ Warning Before You Begin

Flashing will erase all data including photos, apps, and settings. Backup everything important. Always use tested and matched firmware to avoid hard brick or touch-related issues.

Still Facing Boot Issues?

If you’ve flashed correctly and your phone is still stuck or dead, verify you used the correct DA file. You can search your model on firmware4mobile.com for alternative recovery or EMMC test point solutions.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!