Vivo V3 Max PD1523F Firmware Flash File | Stock ROM for Touch & Sensor Repair

MR MOBILE
0

Flash File Firmware Vivo V3 Max | Restart at Logo After Flash Fix

If your Vivo V3 Max keeps restarting at the logo screen after flashing, it may be caused by an incomplete flash, corrupt partitions, or using the wrong version firmware. This page provides the official stock ROM to fix bootloop and restart-at-logo problems permanently.

Why Does Vivo V3 Max Restart at Logo After Flash?

  • Mismatched firmware not aligned with your device's build variant
  • Missing boot, patch, or vendor files
  • Incomplete XML configuration in QFIL
  • Improper use of EDL/Test Point flashing method

Flashing the correct Qualcomm-based stock ROM will reset and rebuild corrupted system partitions, eliminating the bootloop error.

Important Instructions Before Flashing

Attention: Always verify the firmware version matches PD1523F and that your Vivo V3 Max battery is above 50%. Avoid interruptions during flashing.

Firmware Details

Vivo V3 Max Stock Firmware Overview
ModelVivo V3 Max (PD1523F)
CPUQualcomm Snapdragon
Issue SolvedReboot at logo / stuck on boot
Flash ToolQFIL (QPST Suite)

Steps to Flash Vivo V3 Max Using QFIL

  1. Install Qualcomm USB Drivers on your PC.
  2. Download and extract the firmware archive using 7Zip or WinRAR.
  3. Launch QFIL Tool and select Flat Build.
  4. Click “Browse” and select the prog_emmc_firehose.mbn file from the firmware folder.
  5. Click “Load XML” and select both rawprogram.xml and patch.xml.
  6. Put the phone in EDL (Emergency Download Mode) using the test point method.
  7. Connect to PC; QFIL will detect a Qualcomm COM port.
  8. Click the “Download” button to start flashing.

Note: The flashing process usually takes 5-10 minutes. Do not disconnect the cable until the tool says "Download Succeed".

Download Section

Vivo V3 Max Firmware and Tools
Download Vivo V3 Max Firmware (PD1523F_EX_A_2.8.16)
Download QFIL Tool
Download Qualcomm USB Drivers

Backup Warning

⚠️ All user data will be erased during this process. Please back up your important files before flashing. Do not proceed with firmware that doesn't match your variant.

Need More Help?

If your Vivo V3 Max still reboots at the logo or doesn't power on, leave a comment under our video or search your model on firmware4mobile.com for troubleshooting solutions.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!