Flash File Firmware Vivo V15 Pro | Screen Not Turning On Fix After Flash
Is your Vivo V15 Pro (PD1832F) not showing any display after flashing? This issue typically occurs due to an incompatible firmware version or incomplete flashing. In this guide, you’ll find the official stock ROM with a step-by-step QFIL method to fix black screen or no display issues after firmware installation.
Firmware Flash File Details:
- Device Model: Vivo V15 Pro (PD1832F)
- CPU Platform: Qualcomm Snapdragon
- Flash Tool: QPST/QFIL
- Fixes: No Display, Boot Fail, Firmware Corruption
When Should You Flash This Firmware?
- After flashing, the phone turns on but the screen remains black
- Touch not working even though device vibrates or connects to PC
- Device keeps booting in fastboot but doesn’t show logo
- System update failed and now screen won’t turn on
Precaution Before You Begin
Important: Charge the phone battery to at least 60% before flashing.
Use only firmware that matches the phone’s build/version to avoid permanent damage.
Back up your data – this process will wipe all content on the device.
Download Links – Vivo V15 Pro Stock Firmware & Tools
| File | Download |
|---|---|
| Official Firmware (PD1832F_EX_A_8.71.16) | Download Firmware |
| QPST Flash Tool | Download Tool |
| Qualcomm USB Drivers | Download Drivers |
How to Flash Vivo V15 Pro (No Display Fix)
- Install Qualcomm USB drivers on your PC
- Extract the downloaded firmware and QFIL tool using 7-Zip or WinRAR
- Open QFIL Tool → Select "Flat Build"
- Click Browse and load
prog_emmc_firehose_8953_ddr.mbn - Click "Load XML" → Select
rawprogram0.xmlthenpatch0.xml - Put your phone into EDL mode using Test Point or deep flash cable
- Connect the phone to PC via USB (check Device Manager for Qualcomm HS-USB QDLoader)
- Click the Download button in QFIL
- Wait for flashing to complete – a green success message will appear
Still No Display After Flash?
If the screen remains black after successful flashing:
- Try flashing with a different version of the same build series
- Reflash after format all + download if needed
- Use a different DA/Auth file if the issue persists
Tips for Successful Flashing
- Don’t disconnect the USB cable during flashing
- Use only original firmware (avoid ported/custom ROMs for stock recovery)
- Disable antivirus/firewall during flashing to avoid driver conflict
Need Help?
Facing issues like “port not detected,” QFIL hanging, or incorrect firehose error? Drop a comment on our website for expert support – we respond quickly!