Vivo V1 Max PD1503F Firmware Flash File | Boot Loop Removal Without Data Loss

MR MOBILE
0

Vivo V1 Max Flash File Firmware | Fix Black Screen After Flash

Does your Vivo V1 Max display a black screen after flashing the firmware? If yes, then you’re at the right place. In this post, you'll find the official Vivo V1 Max firmware flash file, proper flashing method, and the solution for display issues that occur post-installation.

This official flash package for the Vivo V1 Max includes boot.img, vbmeta, and programmer firehose files, allowing complete recovery of system software using the QFIL tool. This is ideal for users facing dead screen or boot display failure after flashing.

Why Does the Screen Stay Black After Flashing?

  • Wrong display driver or firmware version used
  • Corrupted partition flashed
  • Incomplete flashing or wrong flashing tool usage

This issue is common if the firmware is not matched to the exact device variant. Fixing it requires a clean flash using compatible files.

Precautionary Steps

Important: Charge your Vivo V1 Max to at least 60% before flashing. Only use firmware files matching your exact model and build number. A mismatch can result in hardware malfunctions or a completely dead device.

Firmware Details for Vivo V1 Max

Vivo V1 Max Flash File Information
Model Name: Vivo V1 Max
Processor Type: Qualcomm
Format: .mbn, .xml, .img
Flash Tool: QPST/QFIL Tool
Main Problem Fixed: Black Screen After Flash

Steps to Flash Vivo V1 Max Using QFIL Tool

Flashing Instructions:
  1. Install Qualcomm USB Drivers on your Windows PC.
  2. Extract both the firmware and QFIL tool using 7-Zip or WinRAR.
  3. Launch QFIL and select “Flat Build”.
  4. Under “Select Programmer”, browse and load the file prog_emmc_firehose.mbn.
  5. Click “Load XML” and choose rawprogram.xml followed by patch.xml.
  6. Power off the device and boot it into EDL mode using test points or USB trick.
  7. Once the Qualcomm port is detected, press “Download” in QFIL to start flashing.

⚠️ Data Loss Notice

Warning: Flashing the firmware will erase all your device data including apps, contacts, and media. Be sure to backup important data before starting the process. Also, never use firmware made for other models or variants.

Download Section

Vivo V1 Max Firmware & Flash Tool Links
Download Vivo V1 Max Firmware
QPST Flash Tool (QFIL)
Qualcomm USB Drivers

Still Seeing a Black Screen?

If the screen remains black after a successful flash, try re-flashing with a different firmware build. In some rare cases, hardware damage or an outdated loader file might be the root cause. You can also comment below with your exact error for a personalized fix.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!