Vivo iQOO PD1824 | Fix Black Screen Bypass Software Corruption
If your Vivo iQOO PD1824 device is showing a black screen or is not turning on after flashing or system updates, this post provides the official stock firmware and detailed guide to recover your phone using the QFIL Flash Tool (Qualcomm Flash Image Loader).
🛠 Problem Resolved in This Guide
- Black screen after flash
- Dead boot (no display, no vibration)
- Wrong firmware flash fix
- Vivo iQOO PD1824 no logo or stuck at Qualcomm logo
⚠️ Important Before You Flash
Make sure the firmware you download exactly matches your phone’s build number. Flashing the wrong version may cause permanent damage or boot failure. Also, ensure your device is charged to at least 60% before starting the flash process.
🧰 How to Flash Vivo iQOO PD1824 (Using QFIL)
- Install Qualcomm USB Drivers on your PC.
- Extract the firmware ZIP using
7-ZiporWinRAR. - Open QFIL Tool from the QPST package.
- Select Flat Build.
- Click Browse next to "Programmer Path" and load
prog_emmc_firehose_*.mbn. - Click Load XML and select
rawprogram.xmland thenpatch.xml. - Boot your Vivo iQOO PD1824 into EDL Mode (use test point method if not booting).
- Connect the phone via USB; ensure
Qualcomm HS-USB QDLoader 9008shows in Device Manager. - Click Download to begin the flashing process.
📋 Firmware Information
| Component | Details |
|---|---|
| PD1824_A_1.16.10_7.1.4G | Official Stock ROM (Zip Package) |
| QPST Tool | Qualcomm Flash Tool (QFIL) |
| Qualcomm USB Drivers | USB Interface Drivers for Flashing |
🔎 Common Fix: Vivo iQOO PD1824 Black Screen After Flash
If your phone remains black after flashing:
- Try re-flashing with battery disconnected (then reconnect once QFIL is ready).
- Ensure
prog_emmc_firehoseis compatible with your device variant. - Use full firmware package including
boot.imgandvbmeta.img. - Check for hardware issues if screen remains unresponsive after multiple attempts.
Need more help? Visit Firmware4Mobile.com and search your Vivo model for tested firmware solutions.