Tecno Pouvoir 3 LB7 MT6739 Firmware Stock Official ROM | Stop Random Vibrations After Update

MR MOBILE
0

🔧 Tecno Pouvoir 3 LB7 (MT6739) Firmware Guide - Fix Bootloop Network Issues

Is your Tecno Pouvoir 3 LB7 facing bootloop, no signal, or touchscreen problems after an update? 📱 This exclusive guide shows how to safely flash the MT6739 stock ROM to revive your device! ⚡

⚠️ Warning: Flashing wrong firmware can brick your device. Double-check model (LB7) and chipset (MT6739) before proceeding!

📥 What You'll Need:

  • Original LB7 firmware (Android 8.1 Oreo)
  • SP Flash Tool v5.1916 (Best for MT6739)
  • USB Drivers (Install MTK Preloader first)
  • Backup (Firmware flash erases all data!)

🔨 Step-by-Step Flashing Process:

  1. Extract firmware - Password usually "www.androiddatahost.com"
  2. Open SP Flash Tool - Load MT6739_Android_scatter.txt
  3. Select "Download Only" - For first-time flash
  4. Connect powered-off phone - Hold Volume Down while plugging in USB
  5. Wait for green tick - Don't disconnect during process!

🚑 Post-Flash Troubleshooting:

Issue Solution
IMEI Invalid Use Maui Meta 3G to rewrite IMEI
Stuck on Logo Try "Format All + Download" in SPFT
No Touch Response Reflash with correct LCD driver files

📢 Legal Note: IMEI modification is illegal in most countries. Only repair original IMEI. Files shared for educational purposes only.

💎 Pro Tips:

  • For faster flashing, use USB 2.0 ports (more stable than USB 3.0)
  • If SPFT gets stuck at DA 100%, try older v5.1828 version
  • Always remove battery (if possible) before flashing

إرسال تعليق

0 تعليقات

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!