Vivo PD1710F Firmware | Touch Screen Fix After Flash
If your Vivo PD1710F touch screen has stopped working after flashing the firmware, you're not alone. This issue usually occurs when an incorrect build version or an incomplete firmware is flashed. Below is the correct method to fix touch issues after flashing Vivo PD1710F.
Common Issues Fixed by Flashing Vivo PD1710F:
- Touch not responding after flash
- Stuck on logo or black screen
- dm-verity verification failed
- Dead after wrong ROM flash
Important Pre-Flash Instructions:
Note: Always check your phone's software version (build number) and match it with the firmware. Incorrect builds may cause touch or bootloop problems.
Download Links for Required Files:
PD1710F_EX_A_1.8.8 Firmware |
QPST/QFIL Flash Tool |
Qualcomm USB Drivers |
How to Flash Vivo PD1710F Stock ROM Using QFIL Tool:
- Install Qualcomm USB Drivers and extract QFIL Tool
- Extract the downloaded PD1710F firmware using 7Zip or WinRAR
- Launch QFIL Tool and select
Flat Build
- Click on Browse and load
prog_emmc_firehose_*.mbn
- Click Load XML and select
rawprogram.xml
followed bypatch.xml
- Boot your device into EDL Mode (test point method recommended)
- Connect device to PC — it should appear as
Qualcomm HS-USB QDLoader 9008
- Click Download to begin flashing
Post-Flash Tips:
- If touch still doesn't work, reflash with a different build
- Factory reset the device from recovery
- Ensure correct touchscreen firmware was included in ROM
For more detailed guides and test point methods for Vivo devices, visit Firmware4Mobile.com.
Tags: Vivo PD1710F Flash File, Touch Fix, Qualcomm Firmware QFIL, Dead Boot Recovery, After Flash No Touch Issue