Download FIGI Note 1 Firmware (Official Stock ROM)
If your FIGI Note 1 is stuck on the logo, showing a black screen after flash, or not booting at all — don't worry! This official stock firmware will help you bring your phone back to life. Whether you're fixing dead boot, OS errors, or dm-verity failed issues, flashing the correct ROM will solve most problems.
🛠 Issues You Can Fix With This Flash File:
- FIGI Note 1 not turning on (dead boot)
- Touch not responding after flash
- Stuck on fastboot or boot logo
- dm-verity verification failed error
- OS corruption or lagging issues
⚠️ Important Pre-Flash Instructions:
Always check your phone's exact variant (3GB/32GB or 4GB/64GB) and use the matching firmware. Also, ensure your battery is above 50% and use original USB cable for stable flashing.
⚠️ Warning: Flashing will erase all personal data from your phone. Backup your contacts, photos, and important files before proceeding. Using the wrong build version may brick your device.
💡 How to Flash FIGI Note 1 Using SP Flash Tool
- Install MediaTek USB drivers on your computer.
- Extract the downloaded firmware using 7-Zip or WinRAR.
- Open SP Flash Tool and load the scatter file.
- Load DA Auth File if needed.
- Click the "Download" button on the tool.
- Power off your phone and connect it to your PC using a USB cable.
- The flashing process will start. Wait until you see the green success message.
📥 FIGI Note 1 Firmware Download Links
Download FIGI Note 1 (3/32) Stock ROM
Download FIGI Note 1 (4/64) Stock ROM
🧰 Required Tools & Drivers
Need Help? If you're unsure about any step, leave a comment on our YouTube videos or search your specific phone model on our site for more repair tutorials.
Note: This guide is for educational purposes only. Flashing is risky if done improperly. Proceed at your own responsibility.