⚠️ Flashing Warning: Ensure your device has at least 50% charge. Use an original USB cable and never unplug during flashing. Confirm firmware matches your exact model to avoid device damage.
🔧 Tools Required for MTK Flashing
- ✅ Windows PC or Laptop
- ✅ MTK USB Drivers Installed
- ✅ SP Flash Tool
- ✅ Correct MTK Scatter Firmware
- ✅ Original USB Cable
📥 Flashing Method Using SP Flash Tool
- Extract the downloaded firmware and flash tool into a folder.
- Open SP Flash Tool and load the DA file.
- Click “Scatter-loading” and select the firmware’s scatter file.
- Click the green Download button.
- Switch off the device, or use battery reconnect method if removable.
- Connect the phone to the PC. Flashing will begin (red ➡️ yellow bars).
- Once completed, disconnect and reboot the phone. First boot may take 5-7 minutes.
📌 Download Important Tools
| 🔌 MTK USB Drivers | Download |
| 🛠️ SP Flash Tool | Download |
📢 Note: Flashing incorrect firmware can hard-brick your device. Always backup your data and verify model compatibility before proceeding.