How To Flash Chinese MTK Any Mobile Phone

MR MOBILE
0
Flashing Warning

⚠️ Flashing Warning: Ensure your device has at least 50% charge. Use an original USB cable and never unplug during flashing. Confirm firmware matches your exact model to avoid device damage.

šŸ”§ Tools Required for MTK Flashing

  • ✅ Windows PC or Laptop
  • ✅ MTK USB Drivers Installed
  • ✅ SP Flash Tool
  • ✅ Correct MTK Scatter Firmware
  • ✅ Original USB Cable
(ads)

šŸ“„ Flashing Method Using SP Flash Tool

  1. Extract the downloaded firmware and flash tool into a folder.
  2. Open SP Flash Tool and load the DA file.
  3. Click “Scatter-loading” and select the firmware’s scatter file.
  4. Click the green Download button.
  5. Switch off the device, or use battery reconnect method if removable.
  6. Connect the phone to the PC. Flashing will begin (red ➡️ yellow bars).
  7. Once completed, disconnect and reboot the phone. First boot may take 5-7 minutes.

šŸ“Œ Download Important Tools

šŸ”Œ MTK USB Drivers Download
šŸ› ️ SP Flash Tool Download
šŸ“¢ Note: Flashing incorrect firmware can hard-brick your device. Always backup your data and verify model compatibility before proceeding.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!