Figi G6 Stock Firmware is essential for fixing many common issues like boot loops, stuck on fastboot, dead boot, and software crashes. Whether your Figi G6 is not turning on, stuck on the logo, or facing DM-Verity or OS errors, flashing the original ROM using SP Flash Tool can bring it back to life.
Common Problems Fixed by Flashing Figi G6
- Figi G6 stuck at logo or boot loop
- Touch not working after firmware update
- Black screen after flashing
- Secure boot or DM-Verity verification failed
- Fastboot mode stuck or OS not loading
Important: Read Before Flashing
✅ Make sure the firmware you download matches your Figi G6 model and build number.
✅ Battery should be at least 50% charged before you begin.
✅ All data on your phone will be erased. Please back up important files before proceeding.
Steps to Flash Figi G6 Using SP Flash Tool
- Install MTK USB drivers on your computer.
- Download and extract the Figi G6 firmware zip using WinRAR or 7-Zip.
- Open the SP Flash Tool (version v5.1812 is recommended).
- Click "Scatter-loading" and load the
MT6739_Android_scatterfile from the firmware folder. - Load the DA file if your device has secure boot enabled.
- Power off your phone or remove/reinsert the battery (if removable).
- Click the "Download" button on SP Flash Tool.
- Connect the phone via USB cable. The flashing will start automatically.
- Wait 7–8 minutes until you see a green checkmark.
Figi G6 Firmware Build Info
Build ID: FiGi-G6-Android9-21042020
Patch Level: PPR1.180610.011
Security Patch: 2019-05-05
Model: G6 | Platform: MT6739
Board: g1859ph_v2_gu_ten_v9l10_p
Password: (if required: check inside the ZIP or read post description)
Download Links
💡 If you face any issue during the flashing process, feel free to comment on our tutorial videos. For more help, just search your phone model on our site to find the correct repair guide.